Honor Student
Posts: 3
Member Since: ‎07-11-2012
Message 1 of 2 (543 Views)

B2600 FX5 Garbled Text slot 3

I have a B2600 with an FX5 graphics card in slot 3.  I installed HPUX 10.2.  


The text output is garbled in the blue areas of the welcome screen.  I have swapped both the I/O cage and FX5 graphics card and still have garbled text in the blue areas.  If I move the FX5 card to another slot (slot 4) the text output is normal.  Does this mean there is an issue with the system board?  Is there a fix for this?

Posts: 13
Member Since: ‎06-26-2001
Message 2 of 2 (534 Views)

Re: B2600 FX5 Garbled Text slot 3

The PCI card cage only contains the slots.  Its the motherboard that contains the PCI bridge and I/O controllers.  Likely its the local bus adapter for that particular slot that is causing the issues.


However, slot 4 is just as capable as slot 3, so if you are not using the slot 4, just move the card over.



† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation