Question
Reply
 
Top Student
Posts: 8
Member Since: ‎01-05-2013
Message 1 of 3 (3,433 Views)

DC7800 "Parity Check 2" after HDD addition

Today, I bought a 1TB HDD for my DC7800. I installed it and it was found in BIOS, but after restarting, it simply says "Parity Check 2." Pressing any key causes it to shut off the monitor.  Researching this issue, I found it's usually caused by a PCI device or by the memory, but that doesn't really make sense since I did not change anything other than adding a new HDD. I am currently in the process of resetting the CMOS. If you need any more information, feel free to ask.

Reply
0
Top Student
Posts: 8
Member Since: ‎01-05-2013
Message 2 of 3 (3,429 Views)

Re: DC7800 "Parity Check 2" after HDD addition

Resetting the CMOS and disconnecting the new HDD did not work, so maybe it is an issue with something else.

Highlighted
Top Student
Posts: 8
Member Since: ‎01-05-2013
Message 3 of 3 (3,426 Views)

Re: DC7800 "Parity Check 2" after HDD addition

Okay, it turned out to be one of the PCI devices. I must have bumped it or something. Thanks for reading this topic anyway! I hope I can help others.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation