Question
Reply
 
Honor Student
Posts: 4
Member Since: ‎11-02-2013
Message 1 of 5 (6,170 Views)
Accepted Solution

HP Prime - RPN Mode - Entering Algebraic Expression

For HP Prime calculator in RPN mode, is there a way to enter an algebraic expression?  For example, on HP 50G you use the Tick button, "'" to start the expression and then continue as algebraic.  Should I just switch to CAS to do that?

Accepted Solution

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Entering algebraic expressions on the HP Prime is done the same way as on the HP 50g: just put tick marks around the expression.  On the HP Prime, the tick mark is a shifted key: [Shift] [ ( ) ].

 

Hope that helps!

View solution in context
Highlighted
Grad Student
Posts: 232
Member Since: ‎02-04-2014
Message 2 of 5 (6,145 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Entering algebraic expressions on the HP Prime is done the same way as on the HP 50g: just put tick marks around the expression.  On the HP Prime, the tick mark is a shifted key: [Shift] [ ( ) ].

 

Hope that helps!

-Joe-
Honor Student
Posts: 4
Member Since: ‎11-02-2013
Message 3 of 5 (6,094 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Yes, thank you.  It does work!  It is confusing because the user manual does not seem to explain RPN mode much.  But I see it works.   

Student
Posts: 1
Member Since: ‎12-26-2014
Message 4 of 5 (387 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression

Thanks to you both because that answered exactly what i needed to know. I just purchased a Prime and it greatly differs
From what i'm use to on the hp50. On the hp50 i can handle larger sized numbers and not have to go into scientific notation and see only 12 significant digits. How is that on the
Prime?
Grad Student
Posts: 232
Member Since: ‎02-04-2014
Message 5 of 5 (379 Views)

Re: HP Prime - RPN Mode - Entering Algebraic Expression


garyjack wrote:
On the hp50 i can handle larger sized numbers and not have to go into scientific notation and see only 12 significant digits. How is that on the Prime?

CAS mode on the HP Prime is roughly equivalent to exact mode on the HP 50g.  If you want "exact integers" (more than 12 digits long) on the 50g, you must be in exact mode, and if you want them on the Prime, you must be in CAS mode.  Unfortunately, Prime's CAS mode does not currently support RPN entry, only Textbook and Algebraic entry.

 

Disclaimer: I don't work for HP; I'm just another happy HP calculator user.

-Joe-
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation