Top Student
Posts: 5
Member Since: ‎04-16-2009
Message 1 of 1 (1,135 Views)

Can I scan slides on my scanjet 2300c?

[ Edited ]


Can I scan slides on my scanjet 2300c?


Yes you can, please find more information at the following HP web link:

[Document is no longer available removed Link]

[Below is the content from the document]

[Edited by admin]

HP Scanjet 2300c or 3500c Series - Set up the TMA



Some HP scanners support the HP Scanjet Transparent Materials Adapter (TMA) for scanning 35 mm slides and 35 mm negatives (HP Scanjet 2300c and 3500c series only).


Set up the hardware

The TMA is located inside the scanner lid.

Figure 1: TMA location inside the scanner lid


TMA location inside the scanner lid


To connect the TMA cable to its port on the scanner

    1. Unplug the scanner from the wall outlet or surge protector.
    2. On the back of the scanner, find the round TMA port, which is the second port from the left.
    3. The TMA cable is attached to the TMA light source inside the scanner lid. Holding the TMA cable by its free end, align the connector so the arrow is on the topside.
    4. Gently insert the connector into the TMA port.


Do not force the cable into the TMA port. Forcing the cable can bend or break internal pins.

Figure 2: TMA cable and port


TMA cable and port



Although I am an HP Employee, I am speaking for myself and not for HP.



† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation