Question
Reply
 
Highlighted
Honor Student
Posts: 3
Member Since: ‎02-11-2014
Message 1 of 4 (327 Views)

HP Designjet Z6100 reads 50.2:10

I have a HP Designjet Z6100 reads 50.2:10, I cannot access the web page to try and perform a firmware upgrade. How can I upload the firmware manually with no web access?

Reply
0
Tutor
Posts: 26
Member Since: ‎05-30-2013
Message 2 of 4 (291 Views)

Re: HP Designjet Z6100 reads 50.2:10

download the FW to the root of a USB stick and try through the usb port at back.

If this does not work, there is a way to send it via FTP to the printer.

You will have to contact HP for the instructions and a FW file to send.

 

The error code 50.2:10 refers to the OMAS sensor controller board.

Have you tried to replace this to see if that helps.

 

Cheers,

Roy

Good Luck

Honor Student
Posts: 3
Member Since: ‎02-11-2014
Message 3 of 4 (281 Views)

Re: HP Designjet Z6100 reads 50.2:10

Thank Roy, we are trying the FW upgrade via USB now.

 

Doug

Honor Student
Posts: 3
Member Since: ‎02-11-2014
Message 4 of 4 (278 Views)

Re: HP Designjet Z6100 reads 50.2:10

Thanks Roy,

 

Looks like after running some more tests, we get a 07:10 error. We tried removing and reconnecting all connections to all boards with no luck.

 

System Error:

07:10

Problem Description:

Aerosol Fan driver burnt.

Corrective Action:

Try the following:

• Replace the Interconnect PCA ⇒ Page 357.

• If the System Error continues, replace the Sausalito PCI PCA ⇒ Page 369.

 

Thanks,

 

Doug

 

Calling HP to come a repair as I don't have either board on hand.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation