HP Support Forums
Join in the conversation.
02-01-2009 09:51 AM
02-02-2009 09:10 AM
In the manual it says to use media center or the software for the devices to configure them.
Did your system have a flexijack connector?
Connect your audio cable to the FlexiJack connector on the audio card.
2 Click the Windows Start Button , All Programs, Creative, and then
Creative Console Launcher.
3 Click the Jacks button.
4 Under FlexiJack Mode, select either Digital I/O or Mic-In/Line-In.
5 Close the window.
that was in the online pdf manual for your pc.
Alernatively there is the onboard HD Audio. You should be able to right-click the icon that may be in your systray to access
The Realtek HD Audio Manage. You can set up all that you asked about right there as well.
The documentation that came with your system apparently does not have the information that I found online at the HP support page for your system. I believe that if you read through it. You will find the answers to most of your questions more easily than I. You have your PC right before you to play around with and configure as you please.
|**Click on the White Kudos star on the bottom left if you would like to say Thanks.**|
**Clicking the "Accept as Solution" option on a post that helps or solves your issue helps others googling for a solution to the same problem you are facing**
Microsoft MVP 2013- Microsoft Windows Expert - Consumer