08-26-2011 02:53 PM
MY EXTERNAL, HP W2207h LCD FLAT SCREEN MONITOR OPERATES FINE WITH THE EXCEPTION OF THE MENU FLASHING ON/OF SCREEN EVERY 3 SECONDS, AND A WHITE SIGN THAT READS, "OSD LOCKOUT." I HAVE TRIED: HOLDING MENU AND POWER BUTTON DOWN TO NO AVAIL! NOW THE POWER BUTTON WILL NOT TURN OFF-THE LIGHT GOES FROM ORANGE TO BLUE. THE RESULT, I TURN OFF MONITOR BY UNHOOKING THE POWER CORD FORM OUTLET..PLEASE HELP!
Solved! View Solution.
Re: HP W2207h LCD MONITOR-HOW TO TURN OFF OSD LOCKOUT?
08-26-2011 05:45 PM
08-26-2011 05:45 PM
Try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
Then if OSD still continues, try the OSD Lockout Procedure again.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP ENVY 17t Touch,i7-5500u,16GB, 256 GB SSD (on loan)
HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-5930k, X99, 16GB 2800 MHz DDR4, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, EVGA GTX 760TI, Corsair H75 water cooler
Windows 8.1 UEFI mode
02-15-2012 12:52 AM
i also have the same problem.tried holding down the menu button for 5 seconds and it did not work.so then i uplugged the power cord and held the power button for 60 seconds.it worked for a couple days but it just started happening again a while ago. question,am i suppose to unplug the power cord and hold down the power button for 60 seconds, or am i suppose to turn off the computer and then unplug the monitor power cord and hold the power button down for 60 seconds then plug it back in.
02-15-2012 10:27 AM
To unlock osd lockout you have to hold the menu button lomger - maybe up to 30 sec.
02-18-2012 06:41 AM
PLEASE DO NOT BUY A WHOLE NEW MONITOR! THIS IS WHAT I DID: I OPENED THE BACK OF MONITOR WITH A BUTTER KNIFE-NOTHING TOO SHARP FOR THE BACK PANEL WILL SNAP BACK- TRACE THE TWO THIN WIRES THAT ARE CONNECTED TO THE MENU BUTTONS AND TOTALLY DISCONNECTED BOTH. NEVER HAD A PROBLEM WITH OSD LOCK LOCK-OUT AGAIN!!
FURTHER, THE MENU BUTTONS USED ON THE MONITOR FOR MAKE CHANGES TO THE INDEPENDENT SCREEN CAN BE CONTROLLED BY YOUR COMPUTER, THIS IS A FACT. TRY IT, IT WORKS PERFECTLY.
02-18-2012 07:02 AM
I TRIED EVERYTHING SUGGESTED BY MANY PEOPLE WHO SAYS TO HOLD DOWN BUTTON THAT WILL NEVER WORK! WHAT WORKED, I SIMPLY TOOK THE BACK OF MONITOR OFF WITH AN UNSHARP BUTTER KNIFE-MONITOR BACK WILL SNAP BACK ON-AND UNHOOKED THE MENU BUTTONS WHICH CONSIST OF 2-3 WIRES-MINE HAD TWO-TAPE THEM OUT OF THE WAY AND THE MONITOR NEVER HAD ANOTHER OSD LOCK-OUT AGAIN!! THE FEATURES LISTED IN THE MONITOR CAN BE CONTROLED BY YOUR COMPUTER NVIDA CONTROLS-FACT.
ENJOY YOUR COMPUTER NOW THAT YOU UNHOOKED THE MENUE WHICH OBVIOUSLY CAME WITH A FAULTY MENU BUTTONS WHEN YOU CONSIDER NUMEROUS POST ON THIS ONE SUBJECT ALONE. ENJOY!
03-06-2012 06:25 AM
was afraid to go through with it but don't need to do it any more cause some how it got fixed by itself. but now i got a volume bug. the volume icon is displayed in front of my monitor and the volume goes all the way down. you would'nt know how to fix this?
03-06-2012 07:11 AM
The volume setting for one or more sound devices might be disabled or set too low. There are several things that can change sound volume: the volume control knob for your speakers or monitor, Windows volume controls, and volume controls in sound software. Any of these volume controls can be set to zero.
Or is it a dynamic phenomena?