02-11-2010 07:04 AM
Resolution changes periodically and the volume pop-up for the on screen menu continually appears. I have to hit menu to get it to go away. This happens constantly and is very annoying. Re-loaded driver- no help. Re-connected to computer- no help. Using HDMI connection. Anyone else experienced this?
02-23-2010 12:31 PM
Yes! Still have not found the issue either, the only thing I have managed to come up with is the button is stuck or the hardware behind it is bad. Mine is to the point where it will not stay off at all unless you are holding the menu button down. Also when I increase the volume, it goes straight back down to zero, some times it goes up and down on its own.
02-27-2010 07:22 AM - edited 02-27-2010 07:23 AM
I have the same problem it's doing it as I type this it started six months ago did it for a day and went away it comes back now and then now it stuck on all the time. I have purchased a lot from HP but if this is what their product is turning into I thinking it's time to find some else to buy from. I haven't even had this thing for two years yet. Not to mention there was a problem with my PC that started just as the one year on the warranty ran out.
02-27-2010 03:04 PM - edited 02-27-2010 03:05 PM
I found what the problem is. It's the switches on the bottom right hand of the monitor for volume, menu and auto adjust. Mine got so bad that it was literally popping up every two seconds. HP wasn’t willing to help since warranty ran out refused to tell me if it was a hardware or software problem wanted me send it in which means having to pay shipping there and back and $150.00 to look at it. So I ripped the piece of **bleep** apart and pulled the circuit board with the switches out. Problem is gone works just fine. Going to take the circuit board down to local repair shop in town If they give me a fair price to fix it I will have the repair it if not the parts a basic sure radio shack carries the parts. I have all HP Equipment in my house when I spend the kind of money I and you do on stuff like this it shouldn’t be failing a year later.
08-19-2010 04:59 PM
This is crazy! The pop ups were so bad, we took off the plastic frame from the monitor and clipped off the Menu button. It fixed it for about 1 hour and now it's back. Next step is to follow your solution of pulling out the circuit board and switches. I'll keep you posted on the out come.
10-20-2010 01:21 PM
i got exactly the same problem... it appeared about 2-3 months after the warranty ran out. i had problems with hdmi before, because the firmware of the thing is so old, it could be from before 2000. their actual "solutions" are a joke... like use vga instead. this monitor is horrible with vga. i think it's either a firmware bug or a hardware issue. it almost looks as if they did it on purpose. i will not ever buy anything from hp again... ever and i'll tell everyone i know to do the same.
i hope i'll have a new monitor soon, so i can tear this piece of crap appart and rip the audio and osd-connectors out. please let me know, if any of you got around of that problem. i think it's the "minus" key on the monitor, that is faulty for all of us, right? now this can't be just pure coincidence.
10-20-2010 02:22 PM
Try a monitor reset. Power off the PC and monitor. Unplug the monitor and hold down the monitor's power button for 30-60 seconds. Plug the monitor back in and then power up the system.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
12-25-2011 10:17 AM
Yeah I got pissed, unpluged my monitor, pried the buttons off the front panel then got needle nose pliars and just pried them right off the board. The buttons are **bleep** they go bad and then keep activating. Probably better to take it apart, pull the buttons off cleanly and solder in new ones if you know what your doing. Don't do my method ever btw you might hurt yourself. Warning. Worked for me though I cant adjust volume or osd but the monitor works fine now and I have my own speakers so screw it.
04-14-2012 06:14 PM
In my case the "functions" that popup are: "Menu", "- volume" and "Select" ("+volume" is OK)
I pulled out the board with the buttons. Everything works fine now. I downloaded "HP My Display" to control the settings. The board with the four buttons (and two resistors) seems to be OK. IMHO it is not the guilty part. The buttons "clicks" sounds fine, also the resistors and the soldering (maybe a design bug?) .
I'll never buy another thing to HP
Looks here for some instructions to pull out the board (in a user comment): http://www.youtube.com/watch?v=NPh9lSPAGIk