HP Support Forums
Join in the conversation.
08-10-2012 06:41 PM
P6510f orig config w/ 12GB RAM.
DVI-D splitter only works w/ 1 monitor. Monitor 1 goes blank when 2nd monitor pugged in.
so what i can do ask me
>P6510f orig config
So you use the onboard graphics card?
Can't you use the vga port too?
From the specs:
'Can use both DVI and VGA ports at the same time.'
How big are the monitors?
Maybe the graphics chip is too weak to support 2x dvi-d ...
Which resolution do you want to run?
A 21" monitor and a 40" TV will have different natiove resolutions, so a splitter will not work then.
Which input ports do you have at ufc 150 live stream monitor and tv?
Which one do you use?
If you have one dvi-a (or dvi-i) port I would go with a vga-to-dvi_a adapter.
08-22-2012 06:30 PM
A DVI-D splitter is not going to work to two DVI-D devices.
If you need to send digital video to two digtial monitors then install a video card that supports two digital ports.
The HP p6510f only has a 250 watt power supply so that would also need upgrading.