03-16-2013 10:35 AM
I have an old HP m1270n Media Center PC we are refreshing for our children's school math lab.
We tried the current 3.28 Bios update from the site.
It now boots looking for the CD or Floppy load of the original "HPBIOS.rom" file and
doesn't recognize the 328.rom file from the bootable Bios CD we made.
* Where can we download the the original 3.18 BIOS version for the HP Media Center m1270n Asus PTGD1-LA? (We do not have the original HP Media Center m1270n disc.)
- Please send us a link for that orginal AMI 3.18 Bios file. All previos Bios file links have been removed.
Again the most recent HP m1270n 3.28 Bios does NOT work. http://ftp.hp.com/pub/softlib/software7/COL15141/p
Chris - School Volunteer
03-16-2013 08:09 PM
The only BIOS version available on HP's support site for the HP Media Center m1270n Desktop Computer is v3.28. I don't think the version or file is your issue. Rather, I believe your method is the issue. Please use a floppy disk, rename "328.rom" to "HPBIOS.ROM", and don't make it bootable. Next, insert the floppy and boot the computer... let it run at least 10 minute or until there is positive evidence that the process is complete. Please read this HP forum thread entitled "BIOS recovery process for HP systems with AMI BIOS?" for more possible instructions and guidance;
Re: BIOS recovery process for HP systems with AMI BIOS?
Brilliant idea - I tried AMIBOOT.BIN and that didn't work, but then took the Hex Editor to the file - it's HPBIOS.ROM
Renamed the file to HPBIOS.ROM and all now works.
To recap for anyone reading the thread, this was from an HP machine with a corrupt AMI BIOS, to get it back, extract the ROM file from the SP.exe file from the HP website, rename it from VLE5.22 (or whatever the file is that ends in a numeric) to HPBIOS.ROM and copy onto a floppy diskette. Put the floppy in the internal diskette drive (in my case a Sony OEM drive attached using a grey floppy ribbon cable) and boot the machine. You may need to hold down Ctrl-Home, but not 100% sure. After a long while the machine will give 4 or 5 beeps, and reset itself. Once it's done that it will boot normally.
Thanks for your help David - much appreciated.
Please send KUDOs
***** Please click the "White Kudos" Thumbs Up to say THANKS for helping *****
***** Please click the "Accept As Solution" on my post, if my help solved your issue *****
***** This is a user supported forum. I am a volunteer and I don't work for HP *****
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240