06-11-2010 03:04 PM
I recently attempted to install a third party PCI-USB expansion card (Ultra brand). The card seemed to fit but the computer will no longer power up.
If I unplug the power cord and wait a few seconds and then reconnect it the green light on the Pwr Src illuminates but upon pressing the power button the light turns off and there is no movement inside the case what so ever. I have attempted to disconnect the hard drive, remove and reinsert the main power cable, remove and reseat the processor and ofcourse I have also removed the Ultra PCI card. Nothing seems to make a difference.
Is this a Power Source issue? Or could the thrid party card have damaged the mother board? I was quite carefull I dont believe the MB has been physically damaged but i have never encountered this before and it seems odd that it happened after the card was installed.
06-11-2010 03:39 PM
Try this procedure.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP ENVY 17t Touch,i7-6500u,6GB, 256 GB SSD (on loan)
HP Photosmart 6520, HP Deskjet 1112
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
06-15-2010 10:23 AM
If your power supply was good before then I can only assume it's good now. If all you have done is add a pci card then perhaps you have installed it incorrectly. Remove the card and try to reboot. If the system reboots then power down and re-insert the card carefully into another pci slot if you have one available. Check all cabling and ensure card is inserted all the way.