-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Re: HP Envy 750-124 Odense mobo not capable of 1.5v?
Create an account on the HP Community to personalize your profile and ask a question
04-15-2016 09:10 PM - edited 04-22-2016 04:45 PM
All specs say it should work or I thought
Two 240-pin DDR3L DIMM sockets
Supports the following:
PC3L-12800 (DDR3L-1600)
PC3L-10600 (DDR3L-1333)
DDR3L is a dual voltage capable memory SoDIMM, which supports operation at both 1.5V and 1.35V. DDR3L is also pin-compatible with DDR3. DDR3 is a single voltage capable memory SoDIMM, which supports 1.5V operation only.
Booted with 2 8GB sticks installed and got 3 long beeps and 2 short in bios. Tried one stick at a time swapping them out. Did I get 2 sticks no good?
Cannot find a Odense spec sheet/manual anywhere even at Pegatron so if anyone has a link please share!!
Is this Odense mobo not capable of 1.5v on the memory?
Solved! Go to Solution.
Accepted Solutions
04-16-2016 03:55 AM
Hi,
From the following specs, your machine (not the motherboard) supports DDR3L RAM:
http://support.hp.com/my-en/document/c04800122
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
04-16-2016 03:55 AM
Hi,
From the following specs, your machine (not the motherboard) supports DDR3L RAM:
http://support.hp.com/my-en/document/c04800122
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Didn't find what you were looking for? Ask the community