08-13-2010 01:25 PM
Slimline PCs were not meant to be upgraded but the newer models have better optional choices for video processing. If you buy a newer Slimline then buy with your needs in mind. Slimline PCs are not gaming PCs so don't buy one with that as a need. Perhaps the extended warranty would be a consideration.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP ENVY 17t Touch,i7-5500u,16GB, 256 GB SSD (on loan)
HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, EVGA GTX 760TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
11-14-2010 11:03 PM
03-09-2011 08:17 PM
I've had the identical problems with my HP s3100n. I've been trying to resolve all these issues on Windows BBS for a month. Too bad I didn't check this forum first. I've tested everthing except the MOBO and CPU. I have a POST testing PCI card on the way just to see what it tells me but sounds like the MOBO from all of the above .I expect a MOBO to last more than three years under a light load of programs. Maybe it's time to do another build (micro ATX this time) or find a more reliable brand. I can't believe HP thinks three years is the life span of a PC and we shouldn't expect more. Sounds like several of us have been taken by HP. I can see why they only offer a one year warrantee.
04-15-2011 01:34 PM
Hi all, I have had the same problem with these computers. The main issue is that the northbridge chipset is always getting too hot to the point that it fails. I've been able to fix some of these computers by doing a reflow "for those that don't know what a reflow is just do a google search. :-)", but in some cases the damage is already done and the only way to fix it is by replacing the chips. Hope this helps a bit.
04-16-2011 09:45 AM
I have somewhat the same problem. I have a HP Pavilion s3120n slimline that was doing great and after it went to sleep it would not turn on. This has happen 3 or 4 times before so I shut the computer down with the power switch and them turned it back. I would see a flash (once) on the keyboard and then the monitor would light up and say NO SIGNAL and go back off. For the first few times It would read the E drive but that was it. Now you can just plug it in and the blue light will come on and that's about it. Power pack is OK as well as the memory chips. Replaced it with another computer to see if keyboard and monitor would work and they did great. Having it check out by a friend who used to work for HP to see what he can find out.
I liked the small size but there has been a real problem with heat buildup. I keep a fan blowing right on my vents to avoid much of this.
Motherboard, power pack and TV tuner have already been replace once, under warranty but no warranty now and HP wants $289.00 to fix it, and this includes one item replacement only.
Bought the unit new in Sept. 2007.
The bad thing about fixing one of these is that because of heat buildup another part will fail and it becomes a cycle of repairing.
Based upon the information I posted here if you have a idea as what would be the fix please reply. Thank You.
09-06-2011 08:17 AM
I have a s3115.uk slimline that wont restart after booting up or sometimes it wont even boot or post and sometimes it will boot, i have tried different memory, gcard, cpu,psu but still does the same thing, sometimes starts but no restart, I have not tried a mobo yet, the pc is 3 years old, the mobo is a m2nc51-ar, is the mobo a pile of pants?
07-15-2013 12:57 PM
Believe it or not if you take the motherboard completely out and remove everything you can,battery,cpu,heatsink on video chip and wipe off any heatsink compound on video chip from heatsink and preheat your oven to 380 degrees and set your motherboard on a corning ware dish and let it set in there for 7 minutes and then open the door and let it cool off and reinstall your motherboard it will work again for awhile but it will eventually happen again, the video chip gets hot and it looses it's solder connections and by putting it in the oven it will fix it but it will get hot again and happen again unless you install something linke speedfan program and set it up to auto run or run all the time to help keep things cool, you need another fan blowing on the video chip heatsink. once the oven is preheated only let the oven run for one minute longer with the heat still on and then turn the oven off, the other six minutes is enough heat and time to fix the problem and after 7 minutes open the oven door and let cool, i've done it lots of times and it always works. be careful.