12-01-2011 02:30 PM
Problem with motherboard powering in. Does NOT power on when shorting the "power-on" pins on the motherboard. Though, shorting the grn & blk (gnd) pins in the 24-pin atx plug works fine. Any suggestions on repairing the "power-on" pins.
12-01-2011 03:50 PM - edited 12-01-2011 03:50 PM
wiredawg2011 wrote: Problem with motherboard powering in. Does NOT power on when shorting the "power-on" pins on the motherboard. Though, shorting the grn & blk (gnd) pins in the 24-pin atx plug works fine. Any suggestions on repairing the "power-on" pins.
Hello wiredawg2011, Shorting the power supply green to black pins just allows the power supply to be activated (turned on).
If the motherboard has the power supply connected to it and the PWR pins on the motherboard are connected for a small period of time, the motherboard should do something if it is not faulty.
If there are no memory modules installed, you should get some beep codes. If everything on the motherboard that is requied to be is installed, except for the hard drive, you should get a black screen after the POST of the system.
From your description, it appears you may have a faulty motherboard.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.
12-01-2011 04:03 PM
This is one way to test the power supply by a leading manufacturer. Notice the fan as a loading device.
Another way is to use a power supply tester such as these from Thermaltake.
In the end, you might want to take the PC into a competent PC repair shop where they have power supply and motherboard testings tools.
HP ENVY 17T-u100, i7-7500U, NVIDIA 940MX, 16GB, 512GB m.2 SSD
HP Photosmart 6520, HP Deskjet 1112
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems