01-24-2014 10:21 AM
In the last few weeks, I've increasingly had the same problem and cannot figure out how to troubleshoot.
When I turn on the PC (or reboot from within Windows 8), the blue power light comes on and the initial boot noises occur, but then nothing happens. The monitor doesn't seem to get video, and th eamber hard disk light just to the left of the power button does not light up. There are no noises coming from the computer.
The only way I've found to get around this is to turn the computer off (by holding down the power button) and try again. It's usually 6-8 tries before I manage to get the computer up and running again.
I've fully updated the drivers -- and I've NOT upgraded to Windows 8.1. Windows Update finds no needed updates. This seems like it has to be a hardware issue.
Any ideas? I did download the "Computer Does Not Start (Windows 8)" document from HP and will try eliminating possibilities through that.
Any help would be much appreciated!
01-24-2014 05:51 PM
What modifications have you made to your PC?
Please post your results after you complete all of the steps and procedures listed in the posted HP document.
Unplug the PC and hold down the power button for 60 seconds and now power up. If the that works then power down. Now try to power up.
If you still have the same issue then try Clearing the CMOS.
HP ENVY 17T-u100, i7-7500U, NVIDIA 940MX, 16GB, 512GB m.2 SSD
HP Photosmart 6520, HP Deskjet 1112
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
02-01-2014 06:43 AM