05-06-2011 07:48 AM
Just connected my hp mouse and keyboard to my HPE375a and now computer will not go into screen saver mode, also when i hit the off button on the remote the PC goes into sleep mode for 30 seconds and then turns back on with no input.
05-15-2011 11:37 PM
All of my wireless HP mice have an on/off switch on the bottom. After you press the off (sleep) button on the remote, have you tried to turn the mouse off with the switch?
I have not had a problem with a wireless mouse keeping a computer from staying in sleep mode (as long as I didn't move the mouse), but I did have the same problem after I networked all of my computers together. The problem turned out to be the LAN port (RJ45). The solution was to go into Device Manager>Network Controller and on the Power Management tab, uncheck "Allow the device to turn on the computer".
05-16-2011 01:56 PM - edited 05-16-2011 01:57 PM
A wireless mouse and keyboard can cause your computer to wake up for no apparent reason
Here are the settings recommended, applies to Vista and 7.
Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..
Loaner: Envy Omen Windows 10 Home 64 4th Gen Intel(R) Core(TM) i7-4720HQ Processor + NVIDIA GeForce GTX 960M 2GB Discrete Graphics (8GB memory) 128GB SSD
Loaner: HP ENVY 8 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8Z87D, I7-4770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 500GB HD SSD
Custom Asus P8P77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z67, I7-2600k, 8GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
All Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
05-16-2011 04:51 PM
Worked it out. For whatever reason the HP mouse will not allow the PC to go to sleep when it is being used on a mouse mat. Leave the mouse on the table and all seems to work good.
The only other problem i have to resolve is when it goes to sleep the monitor goes back and just the mouse pointer showing. Monitor does not go to sleep unless i use the remote!