02-09-2014 06:32 PM
My machine is a P7-1370.
While researching PSU's, I found this statement at http://www.smps.us/power-connectors.html:
"Compaq and HP also used incompatible systems. As a rule of thumb, if you have a branded PC,
you should suspect it may be incompatible with the industry standard."
But in this forum I read about people replacing PSU's in HP machines with Corsair's etc.
Is there any incompatibility in the HP pin-outs?
This question was solved. View Solution.
02-11-2014 01:01 PM
The newer HP consumer class PCs from my observation use standard ATX power supplies. Some of the business class PCs have been known to use propriety power supplies. You might find some of the older HP PCs using a 20 pin ATX connector.
It takes a while for standards to shake out. While using a standardized ATX power supply may save on costs it might not meet the requirements for a particular need hence the need for a special model. Sequencing up power for peripherals is a case that I have seen in the past that has required a specialized power supply. Another situation might be with a small form factor cabinet where a typical power supply would not fit.
I have seen power supplies that are interchangeable between Dell and HP.
HP e9280t, i7-960, 12GB, Vertex 3 120, ATI 4850
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
Custom i7-4770k, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-3770k, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
02-11-2014 03:53 PM
The original PSU in my machine was a Model DPS300AB-73A Part no. 667893-001, 300W, Delta Electronic.
It has standard pinout and is ATX.
I replaced it with an Antec VP450. This unit has the split motherboard connector, i.e. 20-pin, with a separate 4-pin extension. It is ATX; fits right into the HP case, and the screw holes line up!
02-12-2014 09:57 PM - edited 02-12-2014 10:02 PM
Strange your answering your own questions. Stranger is the link you supplied is invalid, unless you edit-out the ":"
To say THANK YOU, press the white "thumbs up" on the left, to render a KUDO.
Please click Accept as Solution, just to the right of my reply if your problem is solved.
You can render both Solution and KUDO
HP DV7t i7 3160QM 2.3Ghz 8GB WIN7-64bit
Custom Asus P8P67 board, I7-2600k, WIN7 Pro 64bit, GTX670 2GB, 16GB RAM, 750W OCZ, 1T HD SATA 6Gb/s
HP m9200t CTO,Win7 Pro 32 bit. ASUS 550Ti 2GB, Rosewill 630W
HP m8100eCTO WIN7 Ultimate 32bit. XFX5670 1GB, Rosewill 530W.
Printer -- OfficeJet Pro 8600 Plus, HP Deskjet F4135