Re: SATA revision 3.0 on Iona-GL8E motherboard (1498 Views)
Reply
Student
guidomen
Posts: 1
Member Since: ‎01-11-2011
Message 1 of 6 (4,466 Views)
Accepted Solution

SATA revision 3.0 on Iona-GL8E motherboard

Does the Pavilion Elite HPE-450t with the msi ms-7613 (Iona-GL8E) motherboard support SATA revision 3.0 (6mb/sec)?
Provost
erico
Posts: 24,714
Member Since: ‎01-07-2009
Message 2 of 6 (4,458 Views)

Re: SATA revision 3.0 on Iona-GL8E motherboard


guidomen wrote:
Does the Pavilion Elite HPE-450t with the msi ms-7613 (Iona-GL8E) motherboard support SATA revision 3.0 (6mb/sec)?

No.

The (Iona-GL8E) motherboard supports SATA specification 2.0 (3.0 GB/s).

 

Best regards,
erico





Help others seeking a solution by clicking on the "Accept As Solution" button if my suggestion resolves the issue you were having
****I am a volunteer, I don't work for HP****


Microsoft MVP - Microsoft Windows Expert - Consumer

Honor Student
petrahebik
Posts: 4
Member Since: ‎09-03-2011
Message 3 of 6 (4,227 Views)

Re: SATA revision 3.0 on Iona-GL8E motherboard

Hi, does that mean SATA 3 internal hard drives will not run at all or will SATA 3 (6gb/sec) run but at a slower speed of SATA 2 (3gb/sec). Thanks

Provost
Big_Dave
Posts: 19,725
Member Since: ‎07-17-2009
Message 4 of 6 (4,217 Views)

Re: SATA revision 3.0 on Iona-GL8E motherboard

[ Edited ]

Hi,

 

SATA III devices are backwards compatible with SATA II and will be limited to SATA II speeds.

 

You will not get any noticeable performance improvement by using a SATA III hard drive unless it's a hybrid model.  If you want a hard drive performance improvement then consider a SSD or RAID 0  two hard drives.

 

The SSD option would be my choice.  The OCZ Vertex II is an excellent choice for a SATA II SSD and it's a top performer according to CPU MAGAZINE and MAXIMUM PC MAGAZINE.

 

 

---------------------------------------------------------------------------------------
HP e9280t, i7-960, 12GB, Vertex 3 120, ATI 4850
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad
Custom i7-4770k, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-3770k, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Honor Student
sudhakar-roy
Posts: 2
Member Since: ‎06-25-2012
Message 5 of 6 (3,238 Views)

Re: SATA revision 3.0 on Iona-GL8E motherboard

what is the best SATA 6gb adn USB 3.0 PCI e cards for MS-7613 (Iona-GL8E) motherboard ?

 

this board has only PCI e 1....so which version? and even if I have a sata 6gb...doest is perform good..??

 

Please advise and help me get a nice cards..

Student
laurent06000
Posts: 1
Member Since: ‎07-06-2013
Message 6 of 6 (1,498 Views)

Re: SATA revision 3.0 on Iona-GL8E motherboard

OCZ SSD Family is not a good choice for fiability.

 

I've just added a Samsung SSD 840 Serie (500 Gb) to my HPE 430 Fr Desktop, and I'm fully satisfied with it even if the HPE 430 fr does not support the 6Gb/s standard.

 

I have the following results (tested with DiskMark v 1.0.0.7) :

 

- Avg write speed : 74.43 Mb/s

- Avg Read speed : 168.03 Mb/s

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation