02-11-2014 12:01 PM
I just purchased an HP Envy 700-074. I liked all the specs on this machine, including the addtional hard drive bay.
I wish to transfer a 1TB data drive from my old Dell running Windows 7 x64 to the new system. Are there going to be any problems, or will the HP pick the drive right up?
This question was solved. View Solution.
02-11-2014 12:37 PM
It all depends as they say.
If the hard drive is SATA and was not in a RAID array or used with bitlocker then you should be OK to use the drive as a data only hard drive. There might be exceptions as some SATA I hard drives might not work on a SATA III port. In this case, an external USB enclosure might make the drive usable.
HP e9280t, i7-960, 12GB, Vertex 3 120, ATI 4850
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
02-11-2014 01:02 PM
It is a SATA drive, but most likely SATA I as it was purchased 4-5 years ago, and my Dell XPS 200 is close to 7 yrs old. Without going into thhe BIOS, I couldn't say for certain.
02-12-2014 02:11 PM
Installled HD. BIOS saw it with no problems, as did Windows 8.1.
Thanks for your input. You never will know if it will work until you try. Installing HD was a piece of cake once I saw where to place it.