HP Support Forums
Join in the conversation.
07-19-2012 04:20 PM
I have a E9180T Pavalion which I have placed in a larger case for better cooling (Diabilotek) but the Resest, HDD LED, Power LED, Reset Switch and Power Switch does not seem to match others so far listed. When hooked up using these pages the restart button just provides me a Blank Black Screen. using the Power Down/Power up switch whill cause the system to boot normally.
Solved! Go to Solution.
07-19-2012 04:43 PM
Your PC has the Truckee motherboard. Get out your magnifying glass and a flashlight. Look at the edge of the board next to the front panel header. You should be able to see the pin out etchings. The pin outs are fairly standard in many of the newer HP PCs. See the below image.
HP e9280t, i7-960, 12GB, Vertex 3 120, ATI 4850
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP DV7-7000, i7-3610QM, 8GB, Intel 160GB SSD, Nvidia 650m
HP Photosmart Premium C309G, HP Photosmart 6510
Custom i7-4770k, 8GB, Vertex 3 SSD, Corsair HX650,GTX 760
Custom i7-3770k, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
07-19-2012 05:47 PM
This forum can now be canceled, Problem is resolved, these issues were caused by crossed wires in the Diablotek front harness. The HDD LED leads are wired to the Reset switch leads, The Reset Switch is wired to the Power LED and the Power LED is wired to a Molex Connector. That is an issue I will take up with tem. Thanks for all your answers