06-26-2012 08:11 AM
I have Intel Core 2 Duo @ 2.93 Ghz. My operating system is Windows 7 Ultimate x64.
This question was solved. View Solution.
06-26-2012 08:55 AM
The E7500 processor is not supported in the dc7800, which is why you are getting the microcode error.
Below is the list of supported processors.
Intel Core 2 Duo Processors:
Intel Core 2 Duo E4500 Processor (2.20-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4600 Processor (2.40-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4700 Processor (2.6-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E6550 Processor (2.33-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E6750 Processor (2.66-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E6850 Processor (3.0-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E7200 Processor (2.53 GHz, 3 MB L2 cache, 1066 MHz FSB)
Intel Core 2 Duo E7300 Processor (2.66 GHz, 3MB L2 cache, 1066 MHz FSB)
Intel Core 2 Duo E8200 Processor (2.66-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8300 Processor (2.83-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8400 Processor (3.00-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8500 Processor (3.16-GHz, 6 MB L2 cache, 1333-MHz FSB)
Inter Core 2 Duo E8600 Processor (3.33-GHz, 6 MB L2 Cache, 1333-MHz FSB)
As a long shot, you can try installing the latest microcode update. You need to use a bootable USB flash drive with dos files so you can run the flashbin.exe command after you copy the microcode update files to your bootable flash drive.
I can't get to the dc7800 support site. When you can, select the microcode update download from 2010 v1.14
If you are unfamiliar with how to make a flash drive bootable, here is a good "how to" article with the files you need.
04-26-2013 08:24 PM
I need help!
I have the core 2 e8400(upgraded with pc7800) and the 1801-Microcode Update Error.
But all the fans on my pc spins at full speed, really loud and anoying.
Need fix plz
05-01-2013 10:40 AM - edited 05-01-2013 10:40 AM
05-02-2013 06:58 AM
06-13-2013 04:48 AM
I am recieving Microcode update error, my pc is dc7100 small form factor, I updated the BIOS but the problem still presists and i want to get rid of this. please help me. using Win XP professional. I chaged my processor form 2.8 GHz to 3.4 GHz.
01-01-2014 01:35 PM
Please read my post above marked Solved.
You need to install the latest microcode update from the dc7800 support and driver page by using a bootable usb flash drive.