Question
Reply
 
Honor Student
1054
Posts: 2
Member Since: ‎01-03-2012
Message 1 of 4 (1,272 Views)

6.0.6000.16386.6.0.6001.18000 wrp repair

Cpu 4995dt , Windows Vista, 6.0.6000.16386.6.0.6001.18000, WRP repair loop Runs all basic test ok. This problem just started coincidentally after the new year.

Regents Professor
Hanspuppa
Posts: 4,494
Member Since: ‎09-04-2009
Message 2 of 4 (1,253 Views)

Re: 6.0.6000.16386.6.0.6001.18000 wrp repair


1054 wrote: Cpu 4995dt , Windows Vista, 6.0.6000.16386.6.0.6001.18000, WRP repair loop Runs all basic test ok. This problem just started coincidentally after the new year.

Hello 1054, If you can get to the desktop, you might try running the sfc /scannow command from the command screen. Go to the Start Orb, and in the run box, type cmd and press the enter key.

 

This should get you to the black command screen. If you can get there, at the blinking cursor, type sfc /scannow and press the enter key.  ( notice the space between the sfc and the / )

 

This will scan your operating system and replace any corrupted or missing operating system files.

 


 

_____________________________________________

Please click the White Kudos star on the left, to say thanks.

Please mark Accept As Solution if it solves your problem.
_____________________________________________

Honor Student
1054
Posts: 2
Member Since: ‎01-03-2012
Message 3 of 4 (1,231 Views)

Re: 6.0.6000.16386.6.0.6001.18000 wrp repair

I ran the sfc /scannnow and id indicated i00 % verification with no integrity violations. I have a Cloned C drive that I disconnected and reconnected in the SATA 1` port and every thing indicates that it has the identical symptoms even though it has not been cloned for three months. It will also boot in safe mode. The thing that I can't do is boot and get to F10 setup of the BIOS. The HP tech said the procedure I was put through should have reset and loaded the defaults.

 

Thanks for the scan info.

 

1054

Regents Professor
Hanspuppa
Posts: 4,494
Member Since: ‎09-04-2009
Message 4 of 4 (1,228 Views)

Re: 6.0.6000.16386.6.0.6001.18000 wrp repair

Hello 1054, You might try to reset the BIOS manually. You can do this be removing the CMOS battery or by the jumper pin method.

_____________________________________________

Please click the White Kudos star on the left, to say thanks.

Please mark Accept As Solution if it solves your problem.
_____________________________________________

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation