This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Error Msg:"Reboot and Select proper Boot device or Insert Boot Media (3926 Views)
Reply
BWJ Honor Student
Honor Student
BWJ
Posts: 2
Registered: ‎04-12-2009
Message 1 of 4 (3,926 Views)

Error Msg:"Reboot and Select proper Boot device or Insert Boot Media

Need help figuring out this error msg....

I recently installed a new power supply to a HP Media Center PC m1070n...

now i get the above referenced error msg......"Reboot and Select proper Boot device"

I do not have any recovery discs or OS discs.....any recommendations?

 

BWJ

Please use plain text.
Tutor
xylf
Posts: 45
Registered: ‎03-28-2009
Message 2 of 4 (3,913 Views)

Re: Error Msg:"Reboot and Select proper Boot device or Insert Boot Media

try resetting bios to default. during startup press F1. inside bios press F5 > select yes > then F10 to save and exit. and also try to see if bios can detect your HDD. hope this will help you.
Please use plain text.
Grad Student
sumsolstice
Posts: 430
Registered: ‎03-23-2009
Message 3 of 4 (3,934 Views)

Re: Error Msg:"Reboot and Select proper Boot device or Insert Boot Media

I'd verify that the cabling to the Hard Disk Drive is tight, etc.

 

Both ends of the SATA drive cables - motherboard and hard drive.  Also the power connector to the hard drive.

 

If you have more than one hard disk drive in the system, the first one the PC will see is the one connected to the "black" connector on the motherboard.

 

-dm (an HP employee, but the comments/suggestions are mine, not HPs)

-DM (HP Retiree)

NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.

If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.
Please use plain text.
BWJ Honor Student
Honor Student
BWJ
Posts: 2
Registered: ‎04-12-2009
Message 4 of 4 (3,817 Views)

Re: Error Msg:"Reboot and Select proper Boot device or Insert Boot Media

dm

I reconnected the power supply cable to the hard drive ...the machined booted up......Thanks for the help

 

BWj

Please use plain text.