No signal on the monitor after uopdating BIOS

[Xiangdong]

1. HP Pavilion h8-1010, QN556AAR, 2MF116082M

2.Window 7 64-Bit

Hi,

I tried to update the latest BIOS for my computer and downloaded the latest BIOs version (2102 Feb version). I am sure the version I found is what I needed for my computer. I updated successfully according to suggestion from computer. After the computer suggest me to restart the compter, this when the problem occur. There is no signal to monitor after the computer started and it seems that there is no keyboard and mouse checking also during the starting process. I believe all collections are ok and monitor is no problem also.  I have got a black screen and the monitor suggest that no signal detected from both VGR and DIV.

I am not sure if someone can give advice on this problem?

Thank you so much and I lok forward to hearing from you.

[lasvegaswireman]

I would say you need to clear your CMOS settings using the jumper on the motherboard. And if that doesn't help, you may have corrupted the BIOS... possibly making your computer a doorstop.

Frank

[Big_Dave]

Hi,

If Frank's advice doesn't work then contact HP Support since your PC is still under warranty.  The motherboard in your PC does have a ROM recovery function that will probably require a HP technical specialist for use.

HP's support number is 800-474-6836 or 800-HPINVENT or online here.

[Xiangdong]

Hi

I cleared CMOS using jumper and also reset my memory. it is the same as previously. I also power on the mechine without RAM. it give me slow beeping. I also rreset the vedio card but no help to the situation.

Thank you so much for the advice. not sure if any other ways to fix it?

Thanks

[Xiangdong]

Hi,

I have contacted the HP. I bourght this mechine on this Crhistmas which was refurbished. Only three months.  warranty.

Thanks for answering

David Cui