Question
Reply
 
Honor Student
Posts: 3
Member Since: ‎11-11-2012
Message 1 of 6 (14,838 Views)
Accepted Solution

trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please

Reply
0
Accepted Solution

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

You can try removing and reseating the memory and see if that works.

 

If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

 

View solution in context
Provost
Posts: 65,586
Member Since: ‎07-13-2010
Message 2 of 6 (14,831 Views)

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

Hi:

 

You will need to count the beeps and flashes, and read page two of the link below -- the section labeled

Chassis LED and Beep Messages.

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00067072/c00067072.pdf

 

Paul

Honor Student
Posts: 3
Member Since: ‎11-11-2012
Message 3 of 6 (14,823 Views)

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

says memory error so what do i have to do 

Honor Student
Posts: 3
Member Since: ‎11-11-2012
Message 4 of 6 (14,821 Views)

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

counted beeps read your reference says memory error then what do i do sorry no very good at this

 

Provost
Posts: 65,586
Member Since: ‎07-13-2010
Message 5 of 6 (14,816 Views)

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

You can try removing and reseating the memory and see if that works.

 

If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

 

Student
Posts: 1
Member Since: ‎05-24-2013
Message 6 of 6 (14,513 Views)

Re: trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

If that does not work I recommend resetting all the memory cards and pci cards and resetting the CMOS
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation