This HP Community is for Customer to Customer Product Support. First Time Here? Check Out Videos on How to Search, Register, Post and More.

Re: NEC USB 3.0 driver for HP PCIe card. (309 Views)
Reply
Provost
Big_Dave
Posts: 17,067
Registered: ‎07-17-2009
Message 11 of 14 (347 Views)

Re: NEC USB 3.0 driver for HP PCIe card.

[ Edited ]

Hi again,

 

You might give HP Support a call and see if they have an updated driver available.  If they do and it works then please post the link. 

 

The below procedure will help you find a driver based on hardware IDs.

 

  1. Open Device Manager (Control Panel-->System-->Hardware-->Device Manager)
  2. The hardware whose drivers are missing will appear as Unknown device, so it's easier to locate the device.
  3. Right click on the unknown device and click on Properties.
  4. Under the Properties window click on Details tab and select Device Instance Id from the drop down box.
  5. You should see a code similar to this: PCI\VEN_8086&DEV_27DC&SUBSYS_30868086&REV_01\4&1E46F438&0&40F0
  6. In the example text above the Vendor ID is in red and Device ID is in green will always be in the same place for the driver Vendor ID = 8086 and Device ID = 27DC    Your numbers will be different.
  7. Then go to www.PCIdatabase.com
  8. This may not work for all devices.
Please use plain text.
dcc Tutor
Tutor
dcc
Posts: 24
Registered: ‎09-04-2009
Message 12 of 14 (342 Views)

Re: NEC USB 3.0 driver for HP PCIe card.

"The below procedure will help you find a driver based on hardware IDs."

 

Thanks, but there are no unknown devices.

 

Immediately after I installed the NEC driver, there was an entry in my Start Menu and Program List forit  After re-boot, it's gone. All symptoms seem to point to a dead card.

Please use plain text.
dcc Tutor
Tutor
dcc
Posts: 24
Registered: ‎09-04-2009
Message 13 of 14 (310 Views)

Re: NEC USB 3.0 driver for HP PCIe card.

Well, the conclusion that my PCIe card is dead seems to be wrong.  I got an identical replacement card and it has the same symptoms.  Neither port works and the Device manager seems to be saying that there is no driver installed.

 

Universal Serial Bus (USB) Controller

The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

 

I have installed it (successfully, apparently,) uninstalled it, and repeated the process with the supplied driver as well as an apparently identical driver from the HP website.  No joy.

Please use plain text.
dcc Tutor
Tutor
dcc
Posts: 24
Registered: ‎09-04-2009
Message 14 of 14 (309 Views)

Re: NEC USB 3.0 driver for HP PCIe card.

By the way, despite the Device manager saying there is no driver installed, there is a Utility by NEC in the program list.  When opened, it says

 

http://davecrane.info/NECusb.jpg

 

So the driver is installed but it isn't being recognized.

Please use plain text.