12-03-2009 10:42 AM
12-03-2009 11:43 PM - edited 12-03-2009 11:44 PM
Have you tried clearing the CMOS and taking out battery and putting back in.
Also check front panel connectors on the pc that connect to the motherboard such as the power button, hdd light,etc inside the pc.
Then make sure the 24pin or 20pin motherboard cable is plugged in as well as the 5V cpu cable.
01-07-2011 06:54 AM - last edited on 02-21-2017 10:06 AM by OscarFuentes
Try this procedure:
Unplug the PC and open it up. Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. You might want to buy a can of compressed air to blow the dust out of the CPU heat sink. Plug your PC back in and give it a go.
Try this procedure and see if you can isolate the issue. Trouble Shooting Power Supply Issues. Don’t skip any steps.
HP ENVY 17T-u100, i7-7500U, NVIDIA 940MX, 16GB, 512GB m.2 SSD
HP Photosmart 6520, HP Deskjet 1112
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
- Downloading or Updating Software and Drivers for HP Computers
- HP PCs - Sleep and Hibernate Issues (Windows 10, 8)
- HP PCs - Error Messages Display on a Black Screen during Startup or Boot (Windows 10, 8, 7)
- HP PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 10, 8, 7)
- HP All-in-One PCs - Troubleshooting Touch Screen Issues (Windows 8)