03-13-2009 05:33 PM
Solved! View Solution.
06-09-2010 08:58 PM
Usually there is a clear power on password jumper near the clear cmos jumper on the motherboard. You might look for that jumper.
HP ENVY 17T-u100, i7-7500U, NVIDIA 940MX, 16GB, 512GB m.2 SSD
HP Photosmart 6520, HP Deskjet 1112
HP Touchpad, HP Chromebook 11
Custom i7-4790k, Z97, 16GB 2400 MHz DDR3, Intel 750 PCI-E SSD, (2)Samsung EVO 840 SSD, Corsair HX650, GTX 980TI, Corsair H75 water cooler
Windows 10 Pro in UEFI mode - production system
Windows 7 and 8 in UEFI mode - test systems
01-23-2011 07:52 PM
not as simple as u know...
my main board made on 2004
Model HP-Compaq dx6120
this model not used jumper.. they use button as reset.
1. Push CMOS reset button (with battery on it)
2. Push CMOS reset button (while in run mode)
3. Push CMOS reset button (while run mode.. but without battery)
4. Remove battery and power supply for 2 days...
it still ask for "Power On Password"
last think i got in mind is..
1. Flash the cmos but where can i get this flashing things
2. HP gave the default password, so we can reset it manually
3. Throw away those HP model and find another vendor for my office.. and never take this HP Desktop or Laptop...
01-24-2011 06:50 AM - edited 01-24-2011 10:26 AM
Hi: @ Abengah80:
Here is the link to the troubleshooting guide for your PC:
See chapter 2 B for the procedure to clear the BIOS password.
It does use a jumper as do most of these older business desktop PC's. I own several of them so I know (d530, dc7100, dc7600). All have green jumpers to clear the BIOS password. Look by the green motherboard light. The green jumper should be near that area.
05-24-2011 08:57 PM
jumper is not always near the battery, on mine it was not close but was near the cmos area marked Cmos, I removed the jumper and restarted the computer and it booted up. I powered down and reinstalled the jumper and it still booted up