The HP Community is here for you.
12-17-2010 04:36 PM
i'm having trouble with my cd/dvd rom.when i put a dvd in it will read and play it no prob.it will burn video on blank dvd.but when i try to put a cd in to play or blank one to burn audio it won't play it.the little cd icon comes up on screen for split second like its trying to read it but then disappears.when i go to device mang it says drive is working properly but its not.how can i get it to also start playing and burning my cd's too?
12-17-2010 05:00 PM
First, try the automated fixit from Microsoft on the links below.
Check if the drive is now working.
If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked.
Reboot the PC and let Windows reinstall the devices. Check the drive again.
If it still isn't working, run the automated fixit from Microsoft on the link below again.
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Hope this helps.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Insider