Post new question
Question
Reply
 
Honor Student
Posts: 3
Member Since: ‎08-31-2014
Message 1 of 2 (1,117 Views)

IRF configuration

Product Name: HP Enclosure C7000 switch

Hi All,

 

I have configured irf between blade switch 1 & 2, but both switches can't see each other. Here is the current configuration:-

<PPDC-EX-SWT2-1>display irf
Switch  Role   Priority  CPU-Mac         Description
 *+1   Master  32        2c23-3a57-b2cd  -----
--------------------------------------------------

 * indicates the device is the master.
 + indicates the device through which the user logs in.

 The Bridge MAC of the IRF is: 2c23-3a57-b2cc
 Auto upgrade                : yes
 Mac persistent              : always
 Domain ID                   : 0
 
<PPDC-EX-SWT2-1>display irf configuration
 MemberID NewID    IRF-Port1                     IRF-Port2
  1       1        Ten-GigabitEthernet1/0/17     disable
<PPDC-EX-SWT2-1>display irf topology      
                           Topology Info
 -------------------------------------------------------------------------
               IRF-Port1                IRF-Port2
 Switch    Link       neighbor      Link       neighbor    Belong To
 1         TIMEOUT    --            DIS        --          2c23-3a57-b2cd

 

<PPDC-EX-SWT2-1>display current configuration
<PPDC-EX-SWT2-1>display current-configuration
#
 version 5.20.99, Release 2112P02
#
 sysname PPDC-EX-SWT2-1
#
 irf mac-address persistent always
 irf auto-update enable
 undo irf link-delay
 irf member 1 priority 32
#
 domain default enable system
#
 ipv6
#
 undo ip http enable
#
 password-recovery enable
#
vlan 1
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
 group-attribute allow-guest
#
interface NULL0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
#
interface GigabitEthernet1/0/3
#
interface GigabitEthernet1/0/4
#
interface GigabitEthernet1/0/5
#
interface GigabitEthernet1/0/6
#
interface GigabitEthernet1/0/7
#
interface GigabitEthernet1/0/8

#               
interface GigabitEthernet1/0/9
#
interface GigabitEthernet1/0/10
#
interface GigabitEthernet1/0/11
#
interface GigabitEthernet1/0/12
#
interface GigabitEthernet1/0/13
#
interface GigabitEthernet1/0/14
#
interface GigabitEthernet1/0/15
#
interface GigabitEthernet1/0/16
#
interface GigabitEthernet1/1/5
#
interface GigabitEthernet1/1/6
#
interface GigabitEthernet1/1/7

#
interface GigabitEthernet1/1/8
#
interface M-Ethernet0/0/0
 ipv6 address auto
 ip address dhcp-alloc
 ipv6 address dhcp-alloc
#
interface Ten-GigabitEthernet1/1/1
#
interface Ten-GigabitEthernet1/1/2
#
interface Ten-GigabitEthernet1/1/3
#
interface Ten-GigabitEthernet1/1/4
#
interface Ten-GigabitEthernet1/0/17
#
 load xml-configuration
#
user-interface aux 0
user-interface vty 0 7
#
irf-port 1/1

port group interface Ten-GigabitEthernet1/0/17 mode enhanced
#
return

 

<PPDC-EX-SWT2-2>display irf
Switch  Role   Priority  CPU-Mac         Description
 *+2   Master  3         2c23-3a57-b70d  -----
--------------------------------------------------

 * indicates the device is the master.
 + indicates the device through which the user logs in.

 The Bridge MAC of the IRF is: 2c23-3a57-b70c
 Auto upgrade                : yes
 Mac persistent              : always
 Domain ID                   : 0

 

<PPDC-EX-SWT2-2>display irf configuration
 MemberID NewID    IRF-Port1                     IRF-Port2
  2       2        disable                       Ten-GigabitEthernet2/0/17

 

<PPDC-EX-SWT2-2>display irf topology
                           Topology Info
 -------------------------------------------------------------------------
               IRF-Port1                IRF-Port2
 Switch    Link       neighbor      Link       neighbor    Belong To
 2         DIS        --            DOWN       --          2c23-3a57-b70d

 

<PPDC-EX-SWT2-2>display current-configuration
#
 version 5.20.99, Release 2112P02
#
 sysname PPDC-EX-SWT2-2
#
 irf mac-address persistent always
 irf auto-update enable
 undo irf link-delay
 irf member 2 priority 3
#
 domain default enable system
#
 ipv6
#
 undo ip http enable
#
 password-recovery enable
#
vlan 1
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
 group-attribute allow-guest
#
interface NULL0
#
interface GigabitEthernet2/0/1
#
interface GigabitEthernet2/0/2
#
interface GigabitEthernet2/0/3
#
interface GigabitEthernet2/0/4
#
interface GigabitEthernet2/0/5
#
interface GigabitEthernet2/0/6
#
interface GigabitEthernet2/0/7
#
interface GigabitEthernet2/0/8

#               
interface GigabitEthernet2/0/9
#
interface GigabitEthernet2/0/10
#
interface GigabitEthernet2/0/11
#
interface GigabitEthernet2/0/12
#
interface GigabitEthernet2/0/13
#
interface GigabitEthernet2/0/14
#
interface GigabitEthernet2/0/15
#
interface GigabitEthernet2/0/16
#
interface GigabitEthernet2/1/5
#
interface GigabitEthernet2/1/6
#
interface GigabitEthernet2/1/7
interface GigabitEthernet2/1/8
#
interface M-Ethernet0/0/0
 ipv6 address auto
 ip address dhcp-alloc
 ipv6 address dhcp-alloc
#
interface Ten-GigabitEthernet2/1/1
#
interface Ten-GigabitEthernet2/1/2
#
interface Ten-GigabitEthernet2/1/3
#
interface Ten-GigabitEthernet2/1/4
#
interface Ten-GigabitEthernet2/0/17
#
 load xml-configuration
#
user-interface aux 1
user-interface vty 0 7
#
irf-port 2/2

port group interface Ten-GigabitEthernet2/0/17 mode enhanced
#
return

 

 

Please how to solve this issue?

 

Regards,

Mostafa Yasin

Reply
0
Highlighted
Master's Graduate
Posts: 1,338
Member Since: ‎10-03-2009
Message 2 of 2 (1,089 Views)

Re: IRF configuration - HPE C7000 Enclosure switch

This is the wrong company for Servers, Storage, Software, and Networking. Please use the Hewlett Packard Enterprise Community:
https://community.hpe.com/t5/HPE-BladeSystem-Network-Blades/bd-p/bladescategory03

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation