03-20-2017 03:55 PM
I purchased a used HP7520, because my existing 7520 stopped printing black.
The new (to me) printer won't connect to webservices for setup.
The new printer prints and scans fine to my MAc via a wireless connection. I have the latest firmware: ELM1CN1409AR.
I have set a static IP address. I have the Google DNS addresses. The HP network config printout shows "connected" for the internet.
I have tried setup of web services from the printer and from the browser interface with the same result 'Web services not enabled"
ANything else that I should try? Is it possible the printer was set up by the original ower with web services and that is why I can't reset it up?
Thanks for any help.
03-21-2017 12:21 PM
Thanks for the post.
I understand that you are unable to enable web services on your printer, is that right?
Kudos to you for trying a lot of troubleshooting steps on your own.
Have you printed and reviewed the Print Network Configuration Page?
Have you tried to enable web services from the printer control panel?
Please print Network Configuration Page and check if all the test pass.
To print the Network configure page.
From the Home screen, touch the Wireless icon, and then touch Setup.
Touch and drag your finger vertically to scroll through the options.
Touch Display Network Summary or Print Network Configuration Page.
To Enable Web services.
a. Touch the ePrint button on the control panel.
c. Go to www.hp.com/go/ePrintCenter, click the Sign In button, and then click the Sign-Up link at the top of the window that appears.
d. When prompted, enter the printer code to add your printer.
Touch ePrint on the control panel. From the Web Services Summary screen, get your printer's email address.
Compose and send email to your printer's email address from your computer or mobile device, anywhere and anytime. Both the email message and recognized attachments will print.
Refer to page number 23 in the printer manual. Click here for the printer manual.
If the issue persists, please contact our phone support for cloud services.
Please follow the procedure mentioned below to contact our phone support.
- Open link: www.hp.com/contacthp/
- Enter Product number or select to auto detect
- Scroll down to "Still need help? Complete the form to select your contact options"
- Scroll down and click on HP contact options - click on Get phone number.
Let me know how it goes.
If the information I've provided was helpful,
Please give us some reinforcement by clicking the "Accepted Solution" and "Kudos" buttons,
That’ll help us and others see that we’ve got the answers!
Please do post your technical queries on our Forums for assistance.
I am an HP Employee