HP Support Forums
Join in the conversation.
07-05-2011 04:29 PM
Computer currently has 2GB RAM.
Runs Vista 32-bit
Looking upgrading RAM.
Had a couple of questions:
- Is it a matter of adding or replacing?
- Is there a max?
- Is it a farily easy DYI porject?
07-05-2011 06:09 PM
I have attached the link to your service manual. Page 1-2 states you are already at the max with 2 GB.
If you know someone who may have a 2 GB PC2 5300 chip, you can remove one of your 1 GB chips and see if it works, and reports 3 GB. If it reports 3 GB, then it would report 4 more than likely.
The chipset supports up to 4 GB of memory, but the BIOS may not allow it, and there are no BIOS release notes that add support for 4 GB of memory, so it would have to be an experiment on your part.
Installing memory is relatively easy. read Chapter 5 of the service manual for how to do it. Specifically chapter 5, starting on Page 5-12. Remember to remove the battery and A/C power before taking anything apart.
07-11-2011 03:41 PM
It wouldn't make a difference whether or not you run Vista, W7 or XP for that matter--32 or 64 bit.
The reason you are only seeing 3 GB out of 4 is due to memory reserved for hardware such as graphics.
The good news is apparently you can install 4 GB in the notebook where the specs state only 2 GB is the max.