02-08-2012 09:46 PM
02-10-2012 02:06 PM
After reading all the Forum messages because I had the problem of no black printing, I decided to first attempt to let the HP software do its thing! I opened HP Solution Center, clicked on Settings, selected Printer Tool Box and then went thru the "Clean the Printheads" routine, selecting the second cleaning offered in that process.
The test print sent after cleaning showed a perfect printout. Just clogged pores I guess. The HP routine does a very good job without me having to dismantle anything.
Thought you might try this?
02-13-2012 05:02 PM
I have the same problem with the exact same printer. Printer working perfectly on 02/11/12, black ink suddenly stopped printing on 02/12/12. Performed all remedies suggested by HP. As expected, none of them worked. Today I posted an alternative solution that I found on two different tech support sites (also posted links). Both recommended removing and cleaning the printhead; soaking the printhead for 5 minutes was one of the recommended cleaning methods.
I agree that HP does not provide any detailed tech support to its customers. This is disappointing given the cost of its ink cartridges, alone. Seriously, how can we fix our printers when loading paper into our printers is one of the main options offered by HP online tech support? When we're finally fed up to the point of contacting HP tech support, I think most of us have moved beyond that solution. It's pretty clear that HP does not facilitate do-it-yourself repairs.
HP should reward customer loyalty by including tech support; after all, many of us who have purchased numerous HP products over the years expect more for our money and continued loyalty.
02-17-2012 06:48 AM
Hi 8651buttercup, the printhead soak has worked for some people here on the Forum. Check out Bob's post below for more detail....
02-17-2012 12:53 PM
Hi, and thanks so much for your reply.
I was very optimistic about the printhead soak solution, & I tried that solution twice before initially posting here. This solution did not work for me (although I know it has worked for others).
FYI - I also performed the following maintenance functions (to no avail) each time after soaking printhead: Performed several printhead cleanings; & aligned cartridges both from from printer & Solutions toolbox; replaced all ink cartridges; & power cycled printer and computer together and separately. No luck.
Black ink still does not print anywhere - whether is be on a webpage or on a document.
The problem first occured when I initially tried to print on 02/12/2012. I had successfully printed numerous documents one day earlier, on 02/11/2012. There was no hint of a impending malfunction at that time. On 02/10/2012, I changed the preferences to grayscale & successfully printed one document in all black. I changed the printer preferences back to color shortly thereafter (I often change the printer preferences to grayscale to print documents in all black, so I am very familiar with this is process). Nothing unusual occurred at that time.
Still searching for a solution. Refuse to buy new printhead as the cost benefit of doing so does not exceed that of purchasing a new printer (reliability, warranty, etc.). Yet, I have unused HP920XL ink on hand & Officejet 6500 709n is not yet 3 years old.
02-19-2012 05:50 PM
we are having the same problem. Black ink worked one day and then poof! no black. I did everything that other posts said to try, changed the ink cartridge, twice, ran printers clean head mode, and also took printer head apart and soaked it. I thought for sure that was going to fix it becuase so many black clumps came out in the water.
I flushed it until the water ran nearly clear. No dice. I did what you said and ran it in shades od grey. That worked but was too lite and difficult to see.
Did you find a solution?
03-07-2012 11:20 AM
Wow. Had one of these at our shop and one at home. The one at the shop failed with this problem and we were desperate - replaced the printer. Now the one at home has it. I use this printer every day - how can it suddenly have a dirty print head? Tried the double cleaning via printer utility. Nothing. Guess I'll try the soak & compressed air thing.
03-07-2012 12:13 PM
03-07-2012 04:59 PM
Or, do a PARTIAL RESET. I did everything mentioned here - TWICE! Nothing worked until I did the partial reset. Had to also do it twice, but machine worked perfectly after that. My HP 6500 e709n is 3 years old this month.
Note that you must have your printer ON when you unplug it. Scroll down at link, follow instructions for partial reset. GOOD LUCK!