06-08-2014 07:10 PM
My HP Officejet 4500 printer started to print overlapping text then said "problem with printer cartridge (black). For a while could turn off and on and use. I was using an aftermarket black cartridge. I purchased a new HP-92 black cartridge and get the message, " one or more cartridges has a problem". Both cartridge show error. I can put in the after market cartridge and it shows the color carridge levels but error in the black cartridge.
06-10-2014 02:52 PM - edited 06-10-2014 02:53 PM
Welcome to the HP Forums!
I understand you're receiving a message indicating "One or more cartridges has a problem" using the Officejet 4500. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
Are you using Genuine HP Ink cartridges?
I would recommend following this entire HP document on 'Incorrect Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer. Please post your results, as I will be looking forward to hearing from you. Have a great day!
07-27-2014 08:36 PM
I have an issue with my HP OJ 4500. When the ink in the Black cartridge was low, I replaced it with a brand new genuine HP print cartridge 901 black. It strted giving an error message "cartridge problem [Black]" I returned it exchanged it for another cartridge but still the same error message.
07-30-2014 11:46 AM
Thank you for this information.
The only other suggestion I can provide is trying this reset to verify if the error message removes:
1. Remove all ink cartridges from the printer, then close the door
2. Remove the power cord from the printer (Do not press the power button)
3. Please clean the ink cartridges by following this HP document here. (Also, make sure you have completed all the steps from this document)
4. Wait 60 seconds or more, then plug the power cord back in
5. Wait for the printer to turn on completely, then install the ink cartridges
5. Try to printing a document
If these steps don't resolve your issue, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact. Good luck.
08-12-2014 11:01 AM
Done all that before posting this. Have tried 2 brand new original HP Black Cartridges, still the same error message. Done partial reset too, without any luck. I have also cleaned the printheads.
The message keeps on coming up after the printer is turned on.
- Which Cartridges Work with My HP Printer?
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- HP 68xx and 6230 Printers - 'Problem with printhead' Error (Americas and Asia)
- HP 68xx and 6230 Printers - 'Problem with printhead' Error (Europe, Middle East, Africa)
- HP Instant Ink - What Is HP Instant Ink?