How do I check ink level of HP Deskjet F4180? (1970 Views)
Reply
Honor Student
codetalker
Posts: 3
Registered: ‎03-11-2012
Message 1 of 4 (1,970 Views)

How do I check ink level of HP Deskjet F4180?

I don't understand what "value of this field" means. Please clarify.

Provost
banhien
Posts: 28,429
Registered: ‎01-29-2009
Message 2 of 4 (1,961 Views)

Re: How do I check ink level of HP Deskjet F4180?

Hi,

 

Are you asking how to check ink level ? Please use these steps:

 

To check the ink levels from the Software
1. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.
NOTE: You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Services tab, and then click Service this device.
The Printer Toolbox appears.
2. Click the Estimated Ink Level tab.
The estimated ink levels for the print cartridges appear.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Student
leighcara
Posts: 1
Registered: ‎09-03-2013
Message 3 of 4 (1,312 Views)

Re: How do I check ink level of HP Deskjet F4180?

My deskjet only gives alignment and cleaning. No ink level tab. hp deskjet f4180

PhD Student
FixPrint
Posts: 811
Registered: ‎07-15-2013
Message 4 of 4 (1,295 Views)

Re: How do I check ink level of HP Deskjet F4180?

Hi leighcara,

 

I hate to hear you are having issues. There are a few ways to check the levels.  From the information provided those settings should be found in services.  Please see the below information to find the estimate ink levels.  If you would like more information about your product, Click Here

 

A. To check the ink levels from the HP Photosmart Software

     1. In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.

     2. Click the Estimated Ink Level tab.

 

B. To check the ink levels from the Print Properties

     1. Go to print folder to access printer properties (right click device)

     2. Click Services tab

     3. Click Service this device

 

C. Print a test page to view estimated levels and device information

     1. Press and hold the Cancel button, and then press Start Copy Color

     2. Report prints

 

Hope this helps!

 

 

Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation