01-14-2013 10:48 AM
I have an HP Photosmart Premium C309a printer running on a Windows 7, 32 bit computer. Today after replacing two color ink cartridges successfully, I ran a Printer Status Report and noticed that the report indicated that today's installation occurred on 01/08/2013 when in fact todays date is 01/14/2013. Apparently the inner clock of the printer is wrong and has to be set for the correct time. How do I do this?
01-15-2013 01:18 PM
01-16-2013 12:07 AM
This reply is for Shirlzz1. Thanks for your reply. I did like you said and looked at the printer display and it showed the correct date and time but as I stated before that the installation of the two cartridges showed six days prior. I even removed one of the cartridges in question and waited 5 seconds and then re-installed it and then I ran another Printer Status Report thinking it would show the present date of 01/16/13 on that cartridge but it still showed the original installation date of (01/08/2013.
I don't understand it? You'd think that the installation date on the status report would be the same as the printer display??
01-16-2013 08:23 AM
1. With the printer plugged directly into a wall outlet, and turned on, unplug the cord from the rear of the printer.
2. Then unplug the cord from the wall socket.
3. Wait at least 30-60 seconds
4. Plug the power cord back into the wall socket first. If the cord has a module in it, make sure that the light on the module is lit up and then plug cord back into the rear of the printer
5. The printer should power back on by itself, but if not use the power button on front panel to turn machine back on.
- Which Cartridges Work with My HP Printer?
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- HP 68xx and 6230 Printers - 'Problem with printhead' Error (Americas and Asia)
- HP 68xx and 6230 Printers - 'Problem with printhead' Error (Europe, Middle East, Africa)
- HP Instant Ink - What Is HP Instant Ink?