05-13-2013 03:43 AM - last edited on 05-13-2013 06:12 AM by OrnahP
I was recently gifted an HP2050a AIO. Having installed a new pair of cartridges, and run print head clean and alignment tests, suddenly it won't print black. The printer utility also recognises that both cartridges the fact that both cartridges are 'previously used' but surely, that shouldn't affect the final print quality.
Ser nbr:[Personal Information Removed]
Product nbr: CQ199B
This question was solved. View Solution.
05-14-2013 08:17 AM
I understand that you are having an issue with the printer's quality of output. I would look at this link here. It addresses print quality issues in your model of printer and will offer you troubleshooting steps to take in an attempt to fix the print quality issue. It will take you back through some steps that you have already attempted, but it will also show you other steps to take such as cleaning the cartridges manually. I hope that this helps.
05-14-2013 10:09 AM
Hi Shirlzz, Unfortunately, none of the advice given in the link seemed to do any good. Thus far, I have used more than a dozen sheets of paper running print tests etc all to no avail, and yet, the screen shot shows that both cartridges are adequately full. Oddly enough, given that the black cartridge shows part used, it still won't print (it's worth noting that both cartridges are 're-manufactured' and the system has discovered this).
Here's the screen shot showing ink levels:
as you can see, colour colour cartridge is full (yesterday it was showing the same level as the black cartridge.) The suppliers have advised me that they will be happy to exchange the black cartridge. I would rather not go to the expense of purchasing HP originals unless it becomes absolutely necessary.
Many thanks for your advice, but all I can do is to click your Kudos to acknowledge that you offered assistance.
05-14-2013 01:03 PM
Thank you for the response. One can try doing a hard reset the printer to clear error message and restore a printer to a known working condition. No user settings are lost with a hard reset. Here is a link to a document that will walk you through the process. If after you get the new cartridges from the retailer you find that you are still getting the error message; I would get a set of HP non refilled inks as the cartridges could be faulty.