HP Support Forums
Join in the conversation.
02-24-2012 11:08 PM - edited 02-24-2012 11:10 PM
Hi to all.
I'm driving the tij cartridge (HP 45) , but there is some problems !
In firing voltage , Firing pulse width & warming pulse .
please help me.
08-19-2012 07:51 PM
Are you working with a datasheet, or are you attempting to drive the driver board on your own. I have built a driver without the driver chip so I know some of the specs to get the cartridge going. However I would like to use HP's driver chip as these are fitted onto C8855 driver boards and are a convenient way to drive the cartridge.
I will pass my information onto you but it will be useless if you need to do that through the 1825 driver.
It appears one has to signup to acquire this information from HP at a cost, but then to signup you basically have to assure HP that you will not use this information for anything for cartridges in the reman industry.
04-07-2013 02:36 AM
I am attempting to drive the driver board on my own.
I successfully drive cartridge , but I have a problem with connector .
where I find connector 52 pin with spring pin that mounted on C8855 board?
maybe help me similar connector .