06-13-2014 09:39 AM
How long do you expect to receive trouble free printing from a printer, apart from printer jams, aligning cartridges, etc... i had my previous HP for over 10 years and it never caused me any issues. I purchased the HP8500A for its multiple purpose function, scanner, fax, printer.
i purchased this in 2011 and with only light use, with the print setting to draft, i have replced the ink cartridges 3 times with the 940XL version. The third replacement failed the alignment and having spent 4 hours following the information provided on this forum, i discovered that the ink tubes had become free from their cradle and had been trapped and kinked by the print head carrier. I have also discovered the ink has been injected into the printer case beneath the print head carrier.
It became obvious when i noticed the ink tube trapped by the print head carrier, how the tube became kinked and over time, pulled lose and allowed the ink to be injected into the printer beneath the print head carrier.
I want to know how many others have had the same issue and what if anything has been done.
06-13-2014 10:14 AM
The ink in the service station area is normal, some ink is used during startup and printing to keep the printhead from clogging. The document here describes how ink is used. In the vocabularily of that document the Officejet 8500a is an IIC printer.
Kinked or disconnected ink tubes are not normal and the printer will require service as described in the document here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
10-17-2014 04:26 PM
I have exactly the same design fault which resulted in kinked tubes now the cyan doesnt work. Its outside the warranty so I have a pile of expensive junk unless I can repair it myself. Its had only 2 black cartridges so not exactly well used.
Come on HP sort this out for me!
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)