Post new question
Question
Reply
 
Student
Posts: 1
Member Since: ‎09-21-2012
Message 1 of 4 (7,260 Views)

Error 49 on HP 1536 DNF MFP

My client has an error 49 on an HP Laserjet 1536 DNF MFP.  The printer is networked (not wireless) on two Windows XP workstations.  I did the following so far:

- changed the network cable

- restarted the printer

- restarted the workstations

- ran the HP Print and Scan Doctor

- reinstalled the Diagnostic Tool

- Ran the HP toolkit

- restarted the printer

- restarted the workstation

 

The problem remains the same, they send a print command, it sounds like it's goiing to go for a while, the Exclamation Mark flashes, the print job finally goes to the printer.

 

Any suggestions would be greatly appreciated

 

Thank you

 

Jeanne

Reply
0
Distinguished Professor
Posts: 5,287
Member Since: ‎11-22-2011
Message 2 of 4 (7,241 Views)

Re: Error 49 on HP 1536 DNF MFP

[ Edited ]

Hi there jcote65,

Try downloading and running the print and scan doctor located here:

http://support.hp.com/us-en/document/c03275041



It can fix a lot on its own and if not give a better idea of what is going on.


Best of Luck!

You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Student
Posts: 1
Member Since: ‎09-26-2012
Message 3 of 4 (7,238 Views)

Re: Error 49 on HP 1536 DNF MFP

I tried the tool, twice and the problem still exist

Any suggestion would be greatly appreciated

Thanks

Jeannie

Student
Posts: 1
Member Since: ‎10-19-2016
Message 4 of 4 (201 Views)

Re: Error 49 on HP 1536 DNF MFP

'Had the same problems. 

 

'Need to do a full factory reset.

 

Turn of printer.  press & hold left arrow and X keys while turning on the printer.  Keep pressing the buttons until printer says full init.

 

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation