04-02-2012 09:38 PM
Add me in on the conversation on the 6500 e709 and black ink issues.
I'm running Windows 7, 64-bit with service pack 1 on a Lenovo purchased 9 months ago.
I had to replace an ink cartridge this evening as a normal part of the office life cycle. It worked for about 5 pages then disappeared. I have run 3 cleaning cycles and a hard shutdown as suggested above. [snip]
If the first few pages were OK then the ink stopped I would suggest the following: first check the ink cartridge vents are properly cleared as shown in Solution 2 here. If the vents were OK and running the cleaning cycles did not help then try soaking the printhead as shown in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
04-02-2012 10:04 PM
So here's something interesting...
I downloaded and ran HP Printer Hardware Diagnostic Utility. Going throught the Wizard, I prrinted the General Purpose Test-Print Evaluation page - it printed all colors, including black! I also made both a color and black and white copy of the page successfully.
Printer then launched into Alignment, which failed and I still cannot seem to print black!!
This set of symptoms would seem to suggest a software problem, not a printhead or cartridge problem, unless the black printing was done through the color cartridges.
04-02-2012 10:11 PM
So now it's getting weirder...
Selected printer from Windows and printed Test Page, which printed successfully including black. As soon as Test Page was done, it started Aligning Cartridges, first telling me it needed me load paper, even when tray had paper. Alignment did not print black and failed. Hmmm...
04-24-2012 06:29 PM
Thanks for all of your help. I tried cleaning the head 3 times over 3 days... and no success. My office supply store had a good special on the 8600 Premium, and I hope this will be a better printer for our small office (which will be used in tandem with a laser printer. The 6500's in the floor awaiting its final trip to a proper recycling facility. I think the 8600 premium will be a more durable printer given the number of copies we print/copy in a week.
04-26-2012 08:22 PM
I've felt that this is a software issue almost from the beginning. Either a Windows update has corrupted the printer colors or the latest HP update is corrupt. Can something in the softeare be changing the letters from black to white? How do we get the attention of HP tech support?
04-27-2012 09:28 AM
This sucks!! My 6500 E709n is now exhibiting this exact behavior... hard reset not working... no black ink at all - have tried 2 new ink cartridges... this thing is about to become a boat anchor...
I literally printed something at 9:30 this morning.. went to print something again at 10:45 and nada.. nothing.. zip - NO BLACK INK! I have now wasted almost 45 minutes of my day mucking with this....
PLEASE HELP - this is crazy!! I've never had an HP printer fail me (I've had 11 of them)... and these 920XL cartridges are NOT CHEAP!!
04-27-2012 01:09 PM
04-27-2012 03:28 PM
I started having the same problem about a week ago. The black ink just quit printing one day. I changed the black ink cartridge, then changed the other cartridges - nothing. I then went through the aligning process, then the cleaning printhead process - nothing. I followed the HP process for taking the printhead out and cleaning it by hand - nothing. Then I followed the advice for soaking the prinhead until no ink came out, dried it carefully, replaced it and the cartridges - nothing. I bought a new HP priinthead, got it today, replaced the old printhead, replaced the cartridges. Now I get an "Ink Syste Failure" and it keeps telling me to turn the printer off and turn it on again. I've done the hard power reset a few times - Nothing. I've tried the cartridge alignment and printhead cleaning from the HP utility menu - nothing, same failure. It just doesn't work.
So now I have this fairly expensive printer sitting here as so much junk with hundreds of dollars worth of worthless 920XL cartridges. I'm not a happy camper with HP right now! Don't waste the $50 on a new printhead - that doesn't solve the problem!
By the way, I'm on a Mac Pro, so it isn't a Windows driver problem. It's happening exactly the same on the Macs.
04-27-2012 08:14 PM
Since we are experiencing the same problem on different operating systems, then it must be an HP software issue. Does anyone recall updating the driver? Mine is set to update automatically. Is it possible that someone hacked HP and modified the driver? Possibly a disgruntled employee?
I ended up buying an EPSON Workforce 645 and am very happy with it, but I still want to get this printer working again. We need someone at HP to take notice and help us out with this.
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)