12-22-2010 02:42 PM
I have a J4680 All-in-One that suddenly started making a really loud noise right before printing, sounding almost like a machine gun going off in rat-a-tat-tat fashion. The problem started out of the blue, no jams, moving of the machine, etc. I did start getting an error message about the scanner on my computer around the same time this occured, something about the image device not being connected, but I don't know if this is related to this noise. It still prints fine, but the noise occurs right before printing and when I open/close the door. I called HP and was told something is likely broken, but can't get any more info without paying since the warranty ended 34 days ago! Any solutions/suggestions would be greatly appreciated. Thanks.
01-14-2011 12:15 PM
Funny that you have the same problem as we do with the same model printer. It has worked great until this morning, when it started making that same noise. The only message shown was regarding the tri-color cartridge. We did have to change the B&W cartridge a few days ago, but it has printed well since...that is, until this morning. It has not been moved around, overused, bumped, dropped, etc. I haven't been able to get any help with it thus far. The warranty ran out on 12-27-2010. Go figure, but to get any help now, means an extra dollar amt. If you get any help, could you post it so I may be able to fix this problem? I'll do the same. Thanks.
04-23-2011 02:15 AM - edited 04-23-2011 02:17 AM
Well I have an HP Photosmart (it ain't too smart tho) and that loud machine gun sound is heard just before printing or opening the ink door. It just started happening shortly after I had a jam. But since you have a different model computer than mind, I think there must be some sort of design problem that HP has installed in several of their printers (to save money of course). But unfortunately it's faulty. My printer is under a year old so still under warranty. But if you have received a solution, pls share it as I don't want to be without a printer for weeks for repairs. Thanks.
04-23-2011 04:10 AM
I would suggest you get your printer replaced while it is still under warranty. Mine could not be repaired and I had to purchase another one since my problems began a few weeks after my warranty ended. Needless to say, I did not purchase another HP product.
08-01-2011 11:22 PM
I have the exact problem--it sounds like a machine gun noise which just started out of the blue. My printer is a HP PSC 1610 and the rat-a-tat-tat noise starts when it prints or I open the printer.
07-15-2012 12:14 PM
Okay so it seems that I have purchased the same headache two years ago and sailing the same boat as everyone. Just two days ago, my printer started making this noise. What is the problem with HP about fixing their faulty product? The printer prints beautifully and no other problems have come to light. How long will this product last? Does anyone still have this model that can help? Needless to say, I am very disappointed to learn about this problem and that there seems to be no solution thus far.
06-30-2014 04:54 AM
On startup the printer makes a loud "banging" noise for about 30 seconds,then it begin to works. Everything appears to be working, but it does sound as something is on the way out
02-15-2015 04:53 PM
We discovered the reason. Do not do anything if you wish to keep printing. You'll just have to put up with the noise. If you look at what I tell you to look at and move anything, your printer will be useless. Wish I could attach a picture. If you move the ink cartridges to the center and look at the place where they usually sit, off to the right, you see there is a spring behind it. Right next to the spring is a black plastic arm. That arm is broken and cannot be repaired. When you take out the broken piece (which is the part that is clicking) the paper will not pull in any longer. So you either need to put up with the loud, irritating, clicking noise or go and buy a new printer. Sorry. We had fun tearing it apart... figured we had nothing to lose.
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)