Question
Reply
 
Highlighted
Intern
Posts: 101
Member Since: ‎06-12-2013
Message 1 of 5 (4,116 Views)

LASER JET M603

The printer is getting fuser error 50.92.11. It only happen three time from what the event log say. I try to look this up in the  service book but there is not any 50.92.11 in there.

 

Zack

Reply
0
Teacher
Posts: 338
Member Since: ‎06-12-2013
Message 2 of 5 (4,104 Views)

Re: LASER JET M603

Your right it isn't in the manual, by common sense tells us it's in the fuser. Call HP to see if you can get a warranty fuser.
Master's Graduate
Posts: 492
Member Since: ‎07-09-2012
Message 3 of 5 (4,086 Views)

Re: LASER JET M603

Hello, I have noticed this is more and more a common issue with these machines. The error is in regards to heating, you can replace the fuser, and I have had this issue already, but if the error comes back after replacing the fuser, reseat connectors to the dc controller, also, before replacing fuser try a component test to see if everything turns.

 

Hope this helps....

Intern
Posts: 31
Member Since: ‎09-21-2012
Message 4 of 5 (4,057 Views)

Re: LASER JET M603

Hi,

 

You should chek the outlet, need to connect this printer to standard power source not a protective one.

 

Regards

Intern
Posts: 43
Member Since: ‎09-10-2013
Message 5 of 5 (4,052 Views)

Re: LASER JET M603

Please ensure that the printer is not connected to UPS(uninterrupted Power supply ) , it is also observed that above errors or 50.22.11 gets resolved after the printer is connected to direct power source (RAW Power ) .

Although I am an HP employee, I am speaking for myself
Click the Kudos star if this was helpful. Thank You!
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation