02-15-2013 12:42 AM
I took delivery of a new 4620 printer yesterday and have been stuggling ever since to connect it to wifi.
I'm running Windows 8 Pro 64 bit and have an Asus RT-N66U router (running Tomato firmware v1.28).
I've tried a number of different options including:
Ensuring I downloaded the latest HP software
Trying the HP Print and Scan Doctor
Changing the wifi security from WPA & WPA2 to each individually
Disabled windows firewall
The error message always the same:
Solution: For the latest information about wireless connection to HP printers, plus access to help and support resources, click the link below.
Any suggestions gratefully received.
02-15-2013 02:11 AM
What are you using in terms of antivirus/malware protection?
Does it have its own firewall?
Using the Tomato 1.28 menu do a wireless site survey to ensure that your printer is broadcasting and verify the subnet it is in?
Your HP printer must be within the same subnet that your router is broadcasting for it to operate as part of your network.
02-16-2013 10:36 AM
Thanks for the response. I've tried a few more approaches and think I'm getting closer to isolating the issue.
The PC I originally tried to install with has Windows Defender and Windows Firewall. I tried a fresh install with the Firewall disabled but that had no effect.
I have since tried to do another install using a Samsung NC10 netbook (Win XP Home, MS Security Essentials) and get exactly the same issue. That said, the netbook is wifi enabled (unlike the PC mentioned above which is wired LAN only) and as such, the software grabbed the settings from the netbook automatically (but still the same error message. Oddly, it only suggested a WPA connection even when I changed the router setting from WPA/WPA2 to just WPA2.
I then focussed my attention on the router as two different PC's giving the same error suggests they arent the problem. Tomato is finding the printer and listing it in the Device List but there is no IP address listed. This is confirmed on the printer which continues to report that it is not wifi connected. I've also tried assigning a static IP in the router and rebooting both router and printer but it just doesnt seem to want to assign an address.
Next I tried manually assigning the IP address in the Advanced Network settings on the printer but no matter what I do, it seems determined to stay stuck on the Automatic Network setting rather than Manual.
When I printed the Wireless Network Test results, there is a Fail listed again No Filtering and against IP Address it states Not Applicable
Any other suggestions?
02-19-2013 03:38 PM
For some reason your last pic never showed. From the test report you mentioned, the printer thinks that MAC filtering is turned on. Make sure it is turned off. If MAC filtering is off, try setting the router to use a different channel as channel interference may be causing a false MAC filtering failure. Channels 1, 6, and 11 are the best to use with a HP printer. Let me know what you find.
07-23-2013 01:37 PM
The Officejet 4620 does not support the WPA2-Enterprise encryption type. It is setup more for small business/home use and supports WPA2-Personal instead. The 2 step process of WPA2-Enterprise is outside of the scope of the product's capabilities.
Hope this helps,
I am not an HP employee.
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)