05-16-2014 05:17 PM
I installed a new catridge for black on the 4620 and ever since I have its acting as if i never took off the seal from the cartridge. It prints NO black what so ever. Here are some examples:
05-16-2014 05:19 PM
As well on further inspection, i've noticed if you look closely it looks as though the black ink is leaking out into the printer?
I've done the 30 seconds unplug it, etc. I'm out of ideas!
What gives? All HP Genuie cartdiges and all.. help!
05-18-2014 07:05 PM
The ink in the service station area is normal and not a cause for concern. Although it appears to be black ink it is actually a mixture of cyan, magenta, yellow and black. The service station area is where ink is expelled to keep the printheads from clogging.
I would suggest the troubleshooting steps in the document here. Be sure to check the vents as shown in solution three.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
05-23-2014 08:30 AM - edited 05-23-2014 08:31 AM
Just wanted to check in with you and see if the troubleshooting document that Bob_Headrick's recommended worked for you? Are you now able to print in Black ink?
If you are still running into issues please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
I work on behalf of HP
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!