Post new question
Question
Reply
 
Top Student
Posts: 5
Member Since: ‎06-05-2014
Message 1 of 10 (280 Views)

Printer

Print heads were not installed for 6 months...printer will now not print...how to solve?

Reply
0
Provost
Posts: 27,279
Member Since: ‎11-17-2008
Message 2 of 10 (271 Views)

Re: Printer

Please read this post then provide some details.  What printer model? What operating system?

 

If this is a model with separate printheads and ink supplies it is likely the "plumbing" has been clogged with dried ink.

Bob Headrick,  HP Expert

I am not an employee of HP, I am a volunteer posting here on my own time.

If your problem is solved please click the "Accept as Solution" button ------------V

If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Top Student
Posts: 5
Member Since: ‎06-05-2014
Message 3 of 10 (221 Views)

Re: Printer

HP photosmart 5510. Vista. I feel that the black ink printhead is clogged
Provost
Posts: 27,279
Member Since: ‎11-17-2008
Message 4 of 10 (218 Views)

Re: Printer

[ Edited ]

The printheads in the Photosmart 5510 are not removable.  Do you mean the printer had the ink cartrdiges removed for six months?  If this is the case the printheads will almost certainly be damaged and will likely require service.

 

 

Is your printer still in warranty? You can check with HP's warranty tool here.  What country are you located in?

 

 

 

Bob Headrick,  HP Expert

I am not an employee of HP, I am a volunteer posting here on my own time.

If your problem is solved please click the "Accept as Solution" button ------------V

If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Top Student
Posts: 5
Member Since: ‎06-05-2014
Message 5 of 10 (212 Views)

Re: Printer

The color cartridges were removed...they now work. The black cartridge was noi removed.
Provost
Posts: 27,279
Member Since: ‎11-17-2008
Message 6 of 10 (207 Views)

Re: Printer

The printhead would not properly cap the printhead if all the cartridges were not installed.  The black is more likely to clog since the black is pigmented ink, while the color ink is dye based.

 

Running two cleaning cycles and then letting the printer sit for a few days, then running a few more cleaning cycles may recover the printhead.  See the document here for troubleshooting information.

Bob Headrick,  HP Expert

I am not an employee of HP, I am a volunteer posting here on my own time.

If your problem is solved please click the "Accept as Solution" button ------------V

If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Top Student
Posts: 5
Member Since: ‎06-05-2014
Message 7 of 10 (196 Views)

Re: Printer

Did two cleans on Sun and two today (Tues) ....no success. Any other hints?
Provost
Posts: 27,279
Member Since: ‎11-17-2008
Message 8 of 10 (193 Views)

Re: Printer

Is your printer still in warranty? You can check with HP's warranty tool here.  What country are you located in?

Bob Headrick,  HP Expert

I am not an employee of HP, I am a volunteer posting here on my own time.

If your problem is solved please click the "Accept as Solution" button ------------V

If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Top Student
Posts: 5
Member Since: ‎06-05-2014
Message 9 of 10 (188 Views)

Re: Printer

Out of warranty....U.S.
Retired
Posts: 7,879
Member Since: ‎09-03-2013
Message 10 of 10 (176 Views)

Re: Printer

Hi 1876,

 

Thank you for the requested information. I have sent you a Private message on the Forums, please go to your Userpage to the right of your Username you will see your inbox.

 

 

HevnLgh
I work on behalf of HP



Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation