Post new question
Posts: 1
Member Since: ‎02-07-2013
Message 1 of 4 (4,351 Views)

hp error 41.03.02 on M4555

[ Edited ]

Ok  I have a weird problem which I can not figure out.  I have a customer which has a M4555 which is giving me a error 41.03.02. OK here is what I did, First it is not a driver error due to the fact that I run a report and it jams on the first page. On further testing I found that this error comes from tray 2 and tray 3. If I print from tray 1 it prints with no problem. I have changed the trays with a known good printer and the problems still stay with the printer. I disconnected the bottom tray assembly and tray 2 still  errors 41.03.02 (41.03.03 tray 3). I have checked the size and media settings and they are good (letter,plain). checked ps 102 and ps 103 with manual sensor test and tested ok.  The paper cassette sensors are good since it happens with tray 2 and 3. Also I have changed the DC controller.  Any help will be appreciated.

Posts: 1
Member Since: ‎05-27-2015
Message 2 of 4 (2,920 Views)

Re: hp error 41.03.02 on M4555

Hi, do you solve the problem of false 41.03.02 in your laserjet M4555? how? i have the same problem.

Posts: 1
Member Since: ‎10-23-2015
Message 3 of 4 (2,441 Views)

Re: hp error 41.03.02 on M4555

Still waiting 

Distinguished Professor
Posts: 2,987
Member Since: ‎05-09-2011
Message 4 of 4 (2,437 Views)

Re: hp error 41.03.02 on M4555

Manual sensor test is great when you have a solid failure...

Tray 1 runs at half the speed of tray 2 or 3.

Might be a hanging sensor flag.

Try setting tray two to custom and print, it should run slower, does it still fail?

If my post resolves your issue please click the accepted as solution button under it.

To thank a Tech for a post click the thumbs up button under the post.

You can even click both buttons. . .
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation