12-16-2008 10:13 PM
12-17-2008 12:01 AM
I do not have any Mac experience, but on the PC in Vista it is necessary to go to the Printers folder, open the printer properties, Device Settings, Installable Option and set the duplexer to installed. There may be a similar procedure for Mac to enable to duplexer hardware. Google turned up this that may have the appropriate procedure in step 1.
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
12-18-2008 08:38 AM
First make sure you have a paper type selected that is supported for duplexing. Do a test with just plain paper.
If it still can't be selected,
I am going to assume you have OS X v10.5 for this, if you have 10.4 or earlier the process is the same but the names have been altered,
Go to your system preferences,
Open Print and Fax
You should have your printer listed in the left window pane, double click it.
Click on the Info button, (usually a round blue icon in the top frame)
Go to the Driver tab (This may also be under Installable options)
Make sure the duplexer is checked.
Now if the checkbox is greyed out, the driver may not recognize the duplexer. At this point it is time to make sure the Printer sees the duplexer as installed. Print out a configuration page from the printer, usually this is somethng like turning the printer on, press and hold the power button and at the same time press and release the cancel (X) button. Than let go of the power button.
On the page there should be an entry for Automatic Printing Module, check the status. If it says somethiing like "Not Installed" The printer isn't seeing the duplexer. Remove the duplexer and check the connections and make sure nothing is damaged or bent or dirty. Reinstall the duplexer, and try it again.
12-20-2008 04:05 PM
My Printers folder contains two files: a UNIX executable file, Printers.sdb, with which I don't know the application to open it; and, a text file, Printers.sdw, in script I can't decipher.
12-20-2008 04:38 PM
I'm just using the usual letter-size paper; I have OS X v10.5.6 for this; the Driver tab doesn't have a checkbox for the duplexer (the printer only supports manual two-sided printing); the printer configuration page is in code I can't decipher (this may be beside the point given the manual two-sided printing).
12-24-2008 11:51 AM
12-29-2008 08:40 AM
Self test pages can be tricky. If the printer is shutting down, it is normally because you released the power button before the cancel or "x" button. For products that don't have a Color Graphics Display (Test pages are done through the menu on those), The process is:
Turn printer on and let it cycle
Press and hold power button
While holding power button, press and release the "X" or cancel button
release the power button.
Some helpful hints. On printers with no CGD, the "X" button counts and 10 (X=10) and the resume or paper feed button counts as 1. Most printers that can duplex automatically have a self test for that function, it's usually 33. Which means pressing and releasing "X" 3 times, and than pressing and releasing "resume" 3 times before letting go of the power button.
12-31-2008 02:27 PM
06-26-2012 06:15 PM
I had this problem with my HP 6980 with duplex option on my iMac running OS X 10.7.3. Here is how I fixed it.
- Open System Preferences
- Open Print and Scan
- Right Click on Deskjet 6980 in Printer window
- Select “Reset Printing System”
- Click OK for “Are you sure you want to Reset the Printing System”
- Click “+” to set up a printer
- Select Deskjet 6980 Series
- Select “Options & Supplies”
- Make sure “Two-sided Printing Accessory” is selected
10. Go to the document you want to duplex print
11. Select “File”, “Print”
12. Go to the “Copies and Pages” drop down box and select “Layout”
13. Make sure either “Long-Edge” or “Short-Edge” “Two-Sided” printing is selected.
14. Select “Print”
This fixed my duplex printing problem. Hopefully it will fix yours.
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)