03-09-2013 03:16 PM
I haven't run the cd that came with the printer as I'm not using a desktop pc.
I have tried pressing the wireless button on my printer- settings- preferences - wireless (which says its on) - wifi protected setup ....... I've tried both options, the use button set up and the PIN setup.
I get a message 'WPS Connection in progress' (and a 2 min counter counting down) but then after about 1 minute I get 'Error.... Progress stopped'
Can anyone help please?
I presume the problem is the printer isn't finding my wireless network because other things (like iPad and iPhone) can 'see' several wireless networks locally (mine and the neighbours').
I ran a wireless network test result page and it says 'network name (SSID) found FAIL' ........ Which I presume means it can't find my Belkin router (which rather annoyingly is sat next to my new printer! )
My Belkin has a password, which I presume needs putting into my printer at some point but at the moment the printer can't find my network at all
Any help gratefully received
03-10-2013 12:42 PM - edited 03-10-2013 12:43 PM
Reset the printer back to its factory defaults. Power off router and printer. Power on router, wait 2 mins. Power on printer and try connect to your SSID again with your password. Oh, and move the printer away from the router, about 5 feet or so.
If my post resolved your problem, please mark it as an Accepted Solution .
I worked for HP but now I'm retired!
Printer Hint #1 - Always buy a printer with a display panel for configuration.
Printer Hint #2 - Always buy a printer with separate black and separate color cartridges.
Printer Hint #3 - Always buy a wireless printer with an Ethernet port for backup.
Special Note: There is a 96.3% chance the information you seek is in the User Guide/Manual.
04-12-2013 04:34 PM
I now have a print out of wireless test results that says everything is okay (all passed) and I have been able to set up eprint (so can email from iPhone or wherever to printer), and that works.
However, although it says it is on my wireless network, when I try to print from iPad or iPhone I get the message 'no AirPrint printer found' and, to make matters worse, I was able to print before from iPad or iPhone by changing the wifi ffrom my router to connect directly with the printer. Now it won't do that - they both still 'see' the printer as a wifi choice but can't actually connect .????
Help??? I've spent hours trying to sort this and I bought the printer because a) it was on Apple's list of AirPrint enabled ones and b) the reviews I read said it was 10 mins out of the box to set up!!
04-12-2013 05:07 PM - edited 04-12-2013 05:08 PM
04-12-2013 05:12 PM
04-12-2013 05:14 PM - edited 04-12-2013 05:15 PM
Alright, well you have a wonderful night and enjoy your weekend! I hope that when you try this you will respond here and let me know how it goes. I will be around all next week to help you out!
If you think I am being helpful, a great way to show your thanks is by clicking the star below my user name on each post to give me kudos, a quick way of saying thanks on the forum.
Best of luck to you!
05-17-2013 05:51 PM
05-17-2013 07:57 PM
If you live in the US, you can call HP technical support at 1-800-474-6836 (click here if outside of the US) with the iPad in hand and try to reach the Deskjet/Apple department for assistance in getting the printer setup on the wireless network since it is brand new. When I worked in the ePrint department, I would transfer customers with your configuration to that division and, to the best of my knowledge, they helped them get set up.
Otherwise, page 33 of the User Guide can walk you through the steps on how to get this printer onto the network without using a computer. I hope this helps!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!
07-07-2013 03:50 PM
Page 33 of the user guide says you need a desktop or laptop with network connectivity? Are you sure you can do this without a computer?
A lot of people are running WiFi networks ONLY with an Apple mobile device these days and simply can't use the printer if a stand alone setup option is not available. It's not much point having "air print," if it can't be configured!
07-09-2013 03:48 PM
- HP Printers - Using HP Diagnostic Tools for HP Printers in Windows
- HP Printers - After Windows 10 Upgrade, Printer Problems Occur
- HP Printers - Using Google Cloud Print with Your HP Printer
- HP Printers - Printer is Offline (Windows)
- HP LaserJet Pro Printers and Multifunction Printers - HP Smart Install Discontinuation