HP 2055DN displays a firmware error B0605 error message - BAD FLASH BURN

[ggabor]

Hello!

This morning, when i update my p2055dn firmware with updater tool from HP's original site, a saw a green smile on the monitor represents everyrhing is ok. I don't look to my printers screen message, just power cycle the printer, after the updater finished his job.

When the printer boot up i have got a B0605 error message.

I found solutions on this forum, but none of them working for me. I found an older redirecton to HP enterprise forum, but i don't find printer topic, just enterprise server/software categories.

Can anyone solve this firmware update bug without hp service?

Thanks for replies!

[davidzuts · Accepted solution]

Below is a link to the instructions.  If they do not work, then you will need to replace the formatter.

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01687323-5

[ggabor]

I tried that way, but received a 'BAD FLASH BURN - Power cycle' message every time when i try.

Thanks for your reply!

I think the formatter board will be replaced.

[DSha777]

This worked for me :

Extract the exe with 7zip or other application (ljp2050_Series_FW_Update_20141201_signed.exe ).

Then swap the names of the two bin files and then run the firmware update utility again.
Hope this helps someone as I did the today after much searching.

http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/My-HP-2055DN-displays-a-firmware-error-B06...

[pluplik]

worked!

swap the files . 🙂

[kattasb]

with a p2055dn we solved the problem:

unzip ljp2050_Series_FW_Update_20141201_signed.exe manually

rename hp2055d.bin to  hp2055d-bad.bin

copy hp2055dn.bin hp2055d.bin

retry now: FWUpdate.exe

and the printer was again fine.

regards stefan